Share / Export Citation / Email / Print / Text size:

International Journal on Smart Sensing and Intelligent Systems

Professor Subhas Chandra Mukhopadhyay

Exeley Inc. (New York)

Subject: Computational Science & Engineering, Engineering, Electrical & Electronic


eISSN: 1178-5608



VOLUME 8 , ISSUE 1 (March 2015) > List of articles


Huimin Hou / Cundong Xu * / Hui Liu / Rongrong Wang / Junkun Jie / Lianying Ding

Keywords : DASP software, time-domain analysis, cross-spectrum analysis, pressure pipeline.

Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 8, Issue 1, Pages 766-781, DOI:

License : (CC BY-NC-ND 4.0)

Received Date : 01-November-2014 / Accepted: 29-January-2015 / Published Online: 01-March-2015



Pipeline vibration of high frequency and large amplitude is an important factor that impacts the safe operation of pumping station and the efficiency of the pumps. Through conducting the vibration in-situ test of pipeline system in the pumping station, we can objectively analyze the mechanism of pipeline vibration and evaluate the stability of pipeline operation. By using DASP (data acquisition & signal processing) in the in-situ test on the 2# pipeline of the third pumping station in the general main line of Jingtaichuan electric-lifting irrigation project in Gansu Province (later known as “the general trunk third pumping station in Jingtai electric project”) and then adopting time-domain analysis and cross-spectrum analysis to deal with collected data, we can acquire the vibration state in different positions of pipeline. Tests have shown that, the application of DASP in the vibration test of pressure pipeline of the pumping station, compared to the traditional test systems, can not only obtain higher test accuracy and efficiency, but can also provide theory basis and technical support for solving the vibration problems of the same-type pipeline operation. It has a good promotion value in the engineering practice.

Content not available PDF Share



[1] Alavinasab Ali, Jha Ratneshwar, Ahmadi, Goodarz. “Damage identification based on modal
analysis of prestressed concrete pipes”, Pipelines 2011: A Sound Conduit for Sharing
Solutions - Proceedings of the Pipelines 2011 Conference, 2011, pp.12-23.
[2] Li Gong-fa, Gu Yue-sheng, Wu Ze-hao, et al., “Vibration model of pipe conveying fluid
considered fluid structure interaction”, Sensors and Transducers, Vol.16, no.SPEC.1, 2012,
[3] Li Shuai-jun, Liu Gong-min, Kong Wei-tao, et al., “Vibration analysis of pipes conveying
fluid by transfer matrix method”, Nuclear Engineering and Design, Vol.266, 2014, pp.78-88.
[4] Fan, D., Tijsseling A., “Fluid-structure interaction with cavitation in transient pipe flows”,
Journal of Fluids Engineering, Transactions of the ASME, Vol.114, no.2, 1992, pp.268-274.
[5] Singh, Mayand Pratap, Tripathi et al., “FPGA based vibration control of a mass varying twodegree
of freedom system”, International Journal on Smart Sensing and Intelligent Systems,
Vol. 4, no. 4, 2011, pp. 698-709.
[6] Zhang Xiaoming, Liu Jianmin, Qiao Xinyong, et al., “The Analysis on the High-pressure
Pipe Vibration Signal of 12150L Fuel Injection System with Wavelet Transform”,
Proceedings of the International Symposium on Test and Measurement, Vol.3, 2003,
[7] Paidousis M P. Issid N T, “Dynamics stability of pipes conveying fluid”, Journal of Sound
and Vibration, Vol. 33, no. 2, 1974, pp. 267-294.
[8] Du Jian-Hua, Ouyang Zhi-wei, Zhao Yang-dong, “Damage identification method with
structural frequency data from modal test”, Komunikacie, Vol.11, no.1,2009, pp.50-54.
[9] Xu Yuan-zhi, Johnston D. Nigel, Jiao Zong-xia, et al., “Frequency modelling and solution of
fluid-structure interaction in complex pipelines”, Journal of Sound and Vibration, Vol.333,
2014, pp.2800-2822.
[10] Keramat A, Tijsseling, Tijsseling A. S., Hou Q, et al., “Fluid-structure interaction with
pipe-wall viscoelasticity during water hammer”, Journal of Fluids and Structures, Vol.28,
2012, pp.434-455.
[11] D J Wood, “A Study of Response of Coupled Liquid Flow-structural Systems Subjected
to Periodic Disturbances”, ASME Journal of Basic Engineering, Vol. 90, no. 5, 1968, pp.
[12] D J Williams, “Waterhammer in Non-rigid Pipes: precursor Waves and Mechanical
Damping”, ImechE Journal of Basic engineering Science, Vol. 19, no. 1, 1977, pp. 237-242.
[13] A E Vardy, D Fan, “Fluid Structure Interaction in a T-piece Pipe”, Journal of Fluids and
Structures, Vol. 10, no. 1, 1996, pp. 763-786.
[14] Chen Hao, Nan Zhuo-tong, “Wireless sensor network applications in cold alpine area of
west china: Experiences and chanllenges”, International Journal on Smart Sensing and
Intelligent Systems, Vol. 6, no. 3, 2013, pp. 932-952.
[15] Peng Xue-Lin, Hao Hong, “A numerical study of damage detection of underwater
pipeline using vibration-based method”, International Journal of Structural Stability and
Dynamics, Vol.12, no.3, 2012.
[16] Ren Liang, Jia Zi-guang, Ho, Michael Siu Chun, et al., “Application of fiber Bragg
grating based strain sensor in pipeline vortex-induced vibration measurement”, Science
China-Technological Sciences, Vol.57, no.9, 2014, pp.1714-1720.
[17] Gao, Y., Brennan, M.J., Joseph, P.F., et al., “On the selection of acoustic/vibration
sensors for leak detection in plastic water pipes”, Journal of Sound and Vibration, Vol.283,
no.3-5, 2005, pp.927-941.
[18] Liu Xiang, Gao Zhenning, Kong Jiangtao, “Research on dynamic behaviour of wind
tower under ambient excitation based on DASP”, Advanced Materials Research, Vol.243-
249, 2011, pp.1248-1252.
[19] Zhang Ming, Jiao Feng, “Ultrasonic vibration characteristics of nano-composite ceramic
in the ultrasonic polishing process”, Key Engineering Materials, Vol.522, 2012, pp.147-151.
[20] Shuai Wang, Dezhi Zheng, Shangchun Fan, “Analysis on vibration characteristics of
coriolis mass flow sensor”, ICEMI 2009 - Proceedings of 9th International Conference on
Electronic Measurement and Instruments, 2009, pp.2842-2845.
[21] Sharan, S.K., “Time-domain analysis of infinite fluid vibration”, International Journal for
Numerical Methods in Engineering, Vol.24, no.5, 1987, pp.945-958.
[22] Cao Bochao, Sarkar Partha P., “Extraction of rational functions by forced vibration
method for time-domain analysis of long-span bridges”, Wind and Structures, An
International Journal, Vol.16, no.6, 2013, pp.561-577.
[23] T.Ohji, S.C.Mukhopadhyay, M.Iwahara and S.Yamada, "Permanent Magnet Bearings for
Horizontal and Veryical Shaft Machines - A Comparative Study", Journal of Applied
Physics, Vol. 85, No. 8, pp 4648-4650, April 1999.
[24] Khoa Viet Nguyen, “Dynamic Analysis of a Cracked Beam-Like Bridge Subjected to
Earthquake and Moving Vehicle”, Advances in Structural Engineering,Vol.18, no.1, 2015,
[25] T.Ohji, M.Kano, S.C.Mukhopadhyay, M.Iwahara and S.Yamada, “Characteristics of
Rotating Vibration of Repulsive Type Magnetic Bearing Using Permanent Magnet”, Journal
of Magnetic Society of Japan, Vol. 24, No.4-2, pp. 1011-1014, 2000.
[26] Hou Ji-lin, Jankowski Lukasz, Ou Jin-ping, “Frequency-Domain Substructure Isolation
for Local Damage Identification”, Advances in Structural Engineering, Vol.18, no.1, 2015,
[27] S.C.Mukhopadhyay, T.Ohji, T.Kuwahara, M.Iwahara, S.Yamada, F.Matsumura,
"Comparative Studies of Levitation and Control Performances of Two Types Single Axis
Controlled Repulsive Type Magnetic Bearing", NASA periodicals, Vol. NASA/CP-1998-
207654, pp 393-405, May 1998.
[28] Liu Jie, Wang Wilson, Ma Fai, “Bearing system health condition monitoring using a
wavelet cross-spectrum analysis technique”, Journal of Vibration and Control, Vol.18, no.7,
2012, pp.953-963.