Search

  • Select Article Type
  • Abstract Supplements
  • Blood Group Review
  • Call to Arms
  • Communications
  • Hypothesis
  • In Memoriam
  • Interview
  • Introduction
  • Letter to the Editor
  • Short Report
  • abstract
  • Abstracts
  • Article
  • book-review
  • case-report
  • case-study
  • Clinical Practice
  • Commentary
  • Conference Presentation
  • conference-report
  • congress-report
  • Correction
  • critical-appraisal
  • Editorial
  • Editorial Comment
  • Erratum
  • Events
  • in-memomoriam
  • Letter
  • Letter to Editor
  • mini-review
  • minireview
  • News
  • non-scientific
  • Obituary
  • original-paper
  • original-report
  • Original Research
  • Pictorial Review
  • Position Paper
  • Practice Report
  • Preface
  • Preliminary report
  • Product Review
  • rapid-communication
  • Report
  • research-article
  • Research Communicate
  • research-paper
  • Research Report
  • Review
  • review -article
  • review-article
  • review-paper
  • Review Paper
  • Sampling Methods
  • Scientific Commentary
  • serologic-method-review
  • short-communication
  • short-report
  • Student Essay
  • Varia
  • Welome
  • Select Journal
  • In Jour Smart Sensing And Intelligent Systems
  • International Journal Advanced Network Monitoring Controls
  • Architecture Civil Engineering Environment
  • Transport Problems
  • Statistics In Transition

 

Article | 26-August-2018

DEFORMATION MONITORING OF THE STEEL CYLINDER OF CZERSKO POLSKIE - A HISTORICAL WEIR IN BYDGOSZCZ

Weirs are civil engineering structures designed to dam up the stream of water. They are often very old structures subject to preservation care. In order to maintain the level of ground water, it is essential to keep them in good repair. Therefore, weirs require monitoring of their technical condition and geometry. This article contains an elaboration of the results of measurements of the geometry of a steel cylinder which is a major component of the historical weir Czersko Polskie in Bydgoszcz

Jacek SZTUBECKI, Maria MRÓWCZYŃSKA, Małgorzata SZTUBECKA

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 3, 105–110

Research Article | 13-December-2017

High-Spatial-Resolution Magnetic-Field Measurement by Giant Magnetoresistance Sensor – Applications to Nondestructive Evaluation and Biomedical Engineering

Giant magnetoresistance (GMR) sensor has been developed and widely applied to use as magnetic read head in data storage industry. This paper describes new applications of magnetic-field measurement with high spatial-resolution and high sensitivity to nondestructive evaluation and biomedical engineering. For nondestructive evaluation, the GMR sensor, used as magnetic sensor based on eddy-current testing technique, was applied to the detection of micro-crack on micro-conductor for the purpose of

Sotoshi YAMADA

International Journal on Smart Sensing and Intelligent Systems, Volume 1 , ISSUE 1, 160–175

Article | 07-May-2018

Research on Comprehensive Training Platform for Software Engineering Based on Android

With respect to the training program of software engineering specialty, this paper puts forward the comprehensive training platform of Chinese character dictation competition based on Android, and clarifies the purpose and main contents of the comprehensive training platform. Based on the hardware and software facilities of the campus, the C / S model training platform, the use of Android integrated training platform to achieve the Chinese character writing, clearing, timing and other functions

Pan Chunhua, Sun Yan, Zan Fengbiao

International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 2, 14–16

Article | 01-December-2016

THE IMPLEMENTATION OF A CLOUD SYSTEM FOR ELECTRONICS LEARNING IN A MOROCCAN PUBLIC UNIVERSITY

Educational laboratories are places for realizing experimentations and they are important for modern engineering education. The problem is what if there are simply not enough devices or time for conducting experimentation in a local lab? Other factors that prevent the use of local lab devices directly by students are inaccessible or dangerous phenomena, or polluting chemical reactions. The new technologies bring additional strategies of learning and teaching, so it becomes a challenge to

Khalid Ghoulam, Belaid Bouikhalene, Zakaria Harmouch, Hicham Mouncif

International Journal on Smart Sensing and Intelligent Systems, Volume 9 , ISSUE 4, 2051–2068

Article | 06-April-2018

BIM-technologies for Buildings Operation Experiment in MGSU

This article describes the approach of experts of the National Research Moscow State University of Civil Engineering (MGSU) to the construction of modern operating systems in buildings using BIM-technology. This article was performed within the Russian State tasks MGSU project “Methodology of ideas, design and verification of energy-efficient engineering systems conventionally abstract objects (on formal models of buildings)”.

Andrey Volkov, Pavel Chelyshkov

International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 1, 25–28

research-article | 07-January-2020

ANALYSIS OF WIND CONDITIONS AROUND A BUILDING DEVELOPMENT AS A PART OF ITS FORM DESIGNING PROCESS, A CASE STUDY

relatively small area, such as turbulence and rapid airflow acceleration and air stagnation may occur around buildings simultaneously. The dependence of these phenomena on the shape of buildings and the distance between them is clearly visible and proven [2, 3, 4]. Within the scope of environmental wind engineering, knowledge is developed which deals with the issues of wind comfort for pedestrians and of the possibilities for ventilating urban spaces. The following paper concerns the possibility of

Katarzyna ZIELONKO-JUNG

Architecture, Civil Engineering, Environment, Volume 12 , ISSUE 4, 51–58

Article | 08-April-2018

Application of Computational Tools to Analyze and Test Mini Gas Turbine

data acquisition system, writing a new data acquisition program in LabVIEW, installing new pressure and temperature sensors, and performing a first and second law of thermodynamics analysis on the engine in Engineering Equation Solver. In order to update the existing data acquisition system, new NI SCB-68 connector blocks were implemented along with NI USB-6251 terminals. The new hardware is operated through a LabVIEW program running on a new laptop designated and mounted to the mini jet turbine

Haifa El-sadi, Anthony Duva

International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 1, 90–99

research-article | 30-November-2018

EVALUATION OF ECOLOGICAL CONCRETE USING MULTI-CRITERIA ECOLOGICAL INDEX AND PERFORMANCE INDEX APPROACH

, 27, 28]. Most assessment methods only take into account the environmental impact, but not the engineering performance of the concrete being evaluated. The proposed method is supposed to be much simpler to apply than LCA analyzes, but at the same time it can take into account both the impact on the environment and engineering performance based on two equivalent criteria encompassed in the Ecological Index (EI) and Performance Index (PI), as explained below. The eco-friendliness of the concrete can

Wojciech KUBISSA, Roman JASKULSKI, Jiajian CHEN, Pui-Lam NG, Wioletta GODLEWSKA, Pavel REITERMAN

Architecture, Civil Engineering, Environment, Volume 12 , ISSUE 1, 97–107

Article | 09-August-2018

THE USE OF LOW-CALORIFIC VALUE GASES IN ENVIRONMENTAL PROTECTION ENGINEERING

Wojciech Uchman, Sebastian Werle

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 1, 127–132

Article | 26-March-2020

AHSS STEEL WELDING WITH MICRO-JET COOLING IN MOBILE PLATFORMS

This paper focuses on the weldability of advanced high-strength steels (AHSS), commonly used by the automotive industry and civil engineering. These steels have found application in the construction of mobile platforms mounted on vehicles. AHSS significantly outperform other materials when it comes to performance flexibility and mass reduction potential. This article verifies whether the application of micro-jet cooling technology during the welding process might help to overcome these issues

Tomasz WĘGRZYN, Bożena SZCZUCKA-LASOTA, Jan PIWNIK, Adam JUREK

Transport Problems, Volume 15 , ISSUE 1, 131–140

Review | 06-August-2019

COMPUTATIONAL DESIGN FOR THE PRESERVATION AND ENHANCEMENT OF HISTORICAL HERITAGE. A PREFABRICATED COVERING PROTOTYPE FOR ARCHAEOLOGICAL SITES IN RURAL CONTEXT

grid of 1.75 × 1.75 meters and a rectangular limit of 22.75 × 38.50 meters to recall the shape and proportions of the domus. We used 11 pillars to subdivide the structure into 11 parts, in order to design different areas of the domus in different ways. The pillars are placed in the areas left free by the algorithm. 3.2. Optimization criteria In engineering, shape or topological optimizations are used to reach an optimal solution given a set of parameters [14]. In this project we used a structural

Marco Giorgio BEVILACQUA, Filippo IARDELLA, Marco PALAZZUOLI, Rodrigo Rubio CUADRADO

Architecture, Civil Engineering, Environment, Volume 12 , ISSUE 2, 17–26

Article | 26-August-2018

THE IMPACT OF POLYMER RAW MATERIALS FROM THE RECYCLING PROCESS ON THE STRENGTH OF CONNECTORS IN NON STRUCTURAL APPLICATIONS

Waste materials have become a serious problem in many branches of industry, including also civil engineering. The amount of waste generated in civil engineering is still growing, and therefore, the application of recycling in the construction industry is highly justified. In the present paper we demonstrate the effects resulting from the application of polymer raw materials from the recycling process. It particularly involves the recycling of raw materials from polypropylene applied in the

Artur NOWOŚWIAT, Przemysław KNAP

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 2, 93–104

Review | 06-August-2019

THE PRELIMINARY UNIAXIAL COMPRESSION BEHAVIOR OF CORRUGATED COLD FORMED STEEL MEMBERS

conclusions are made, which can be useful for design purposes [5–6]. Piekarczuk and Malowany have worked on the comparative analysis of numerical models of arch-shaped steel sheet sections. As a result, an acceptable reduction of FEM model complexity is proposed for the analyzed structure [7]. Malesa et al. have described two practical applications of the multi-camera digital-image correlation system in order to show its feasibility in engineering failure analysis [8]. Piekarczuka et al. refer to thin

Mahmut KILIÇ, Mahyar MAALI, Abdulkadir Cüneyt AYDIN

Architecture, Civil Engineering, Environment, Volume 12 , ISSUE 2, 105–116

research-article | 30-November-2018

MECHANICAL PROPERTIES OF CEMENT MORTAR WITH GRAPHENE OXIDE

1. INTRODUCTION Over the past decade, nanotechnology has attracted considerable attention in many areas of science and technology, including civil engineering and concrete structures. Since 1974, when the term “nanotechnology” was first created by Norio Taniguchi, the definition of “nanotechnology” has evolved over the years [1]. Today, one can define it as understanding, modifying and controlling matter at the atomic and molecular level to obtain novel, high performance materials featured with

Małgorzata KRYSTEK

Architecture, Civil Engineering, Environment, Volume 12 , ISSUE 1, 91–96

Research Article | 11-February-2019

MORPHOLOGY OF SERRATED GLASS FACADES. REPETITIVE AND NON-REPETITIVE SERRATION. SINGLE AND DOUBLE SERRATED FACADES

qualitative analysis. Recently completed case studies serve as visual (photographs) and graphical illustrations (diagrammatic drawings). A review of technical and engineering justifications of the use of serrated facades is also included and briefly explained.

Marcin BRZEZICKI

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 7–20

Article | 27-August-2018

CURVILINEAR STRUCTURAL ENVELOPS IN CURRENT ARCHITECTURE

Krystyna JANUSZKIEWICZ

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 1, 11–16

research-article | 30-November-2017

PARTITIONS AND THE FLOW OF SMOKE IN LARGE VOLUME BUILDINGS

the “fire” part of the equation is the traditional area of Fire Safety Engineering discipline, while architecture is most often taken as it is. This paper explores the influence of the building itself, on the flow of smoke, and tries to answer a question if a change in the architecture can alter the requirements for smoke exhaust, and efficiently alter the safety of a building. 2. FLOW OF SMOKE IN LARGE VOLUME BUILDINGS A flow of smoke in an undisturbed plume may be considered the simplest case

Wojciech WĘGRZYŃSKI

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 1, 155–164

Article | 26-August-2018

LABORATORY TESTS OF OLD REINFORCED CONCRETE PRECAST BRIDGE BEAMS

Every year all over the world many concrete structures are being disassembled for various reasons. The idea of reuse of whole structural members from disassembled or renovated structures is not a new problem but still it is not well recognized. In Department of Structural Engineering of Silesian University of Technology a wide research program was undertaken concerning acquisition and reuse of steel members [1], RC and PC members [2], [3], [4] and timber ones [5], [6]. Especially reinforced

Szymon DAWCZYŃSKI, Janusz BROL

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 2, 57–63

research-article | 30-November-2019

OVERVIEW OF SELECTED NATURAL GAS DRYING METHODS

presents and describes a number of methods that enable the drying of gas. Each of them has different parameters that will be achieved for the gas after it is dried. Depending on the required degree of dehumidification, process economics and compatibility with other dependent processes, individual methods are more or less used in gas engineering. 2. GAS DRYING METHODS The drying process does not have to mean the complete elimination of steam. It is important to remove only the amount that would have

Natalia GENEROWICZ

Architecture, Civil Engineering, Environment, Volume 13 , ISSUE 3, 73–83

Article | 28-August-2018

APPLICATION OF THE ANALYTIC HIERARCHY PROCESS (AHP) FOR ACOUSTIC ADAPTATION OF CLASSROOMS

costs. The priorities and significance of the main criteria are identified by way of measureable calculations involving reverberation time, STI, costs and expertise, intangible, non-economic cost estimations. The AHP analysis should be viewed as a framework facilitating decision making processes applied in scientific or engineering analyses. The paper demonstrates the acoustic adaptation method of classrooms in terms of acoustic parameters and implementation costs of such an adaptation. The AHP

Artur NOWOŚWIAT, Florentyna SZURMAN

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 4, 73–87

research-article | 30-November-2018

NUMERICAL ANALYSIS OF THE RESPONSE OF PILE-RAFT SYSTEMS CONSIDERING THE APPLICATION OF CEMENT AND POLYPROPYLENE FIBER TREATMENT

1. INTRODUCTION By growing population and lack of appropriate soils, many civil engineering projects have to be constructed on weak soils, which have a great potential of failure due to low strength and high compressibility of underlying soil. Therefore, various improvement methods such as physical stabilization [1, 2], chemical stabilization [3–6], reinforcement with fibers [7, 8] and geotextile [9, 10] are utilized. Polypropylene fibers are cheap and strong against different environmental

Ali HASANZADEH

Architecture, Civil Engineering, Environment, Volume 12 , ISSUE 3, 81–92

research-article | 17-April-2021

ENERGY EFFICIENCY ASSESSMENT OF HEAT INSULATION BUILDING PRODUCTS: FUZZY-PROBABILISTIC APPROACH

energy to the work brought to the house Einput, expressed in units of energy. According to the authors of the review [1], energy efficiency involves the elimination of unnecessary energy waste and increases its efficiency in all energy processes that take place in the house. The maximum energy efficiency will have those buildings in which at the same rate of the energy conversion efficiency, the amount of total investment in the installation of thermal insulation and engineering systems to ensure

Yuriy BIKS, Olena LYALYUK, Georgiy RATUSHNYAK, Olga RATUSHNYAK, Andrey LYALYUK

Architecture, Civil Engineering, Environment, Volume 14 , ISSUE 1, 59–68

Article | 27-August-2018

A NON-LINEAR SHAPED ARCHITECTURE IN URBAN SPACE

Krystyna JANUSZKIEWICZ, Karol G. KOWALSKI

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 5–11

Article | 28-August-2018

ERGONOMICS OF LABORATORY ROOMS - CASE STUDIES BASED ON THE GEOTECHNICAL LABORATORIES AT THE SILESIAN UNIVERSITY OF TECHNOLOGY

The paper is the first, introductory part to the description of an interdisciplinary research project in the modernization of laboratories at The Faculty of Civil Engineering, The Silesian University of Technology. The scope of the paper is to disseminate the current state of knowledge of ergonomics and issues involved in the technology of laboratory processes, describing the methodology of experiments carried out in geotechnical laboratories, their equipment and spatial requirements in view of

Dorota WINNICKA-JASŁOWSKA, Małgorzata JASTRZĘBSKA, Joanna TYMKIEWICZ

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 35–41

Article | 28-August-2018

PRE-DESIGN STUDIES ON THE EXAMPLE OF MODERNIZATION PROJECT OF GEOTECHNICAL LABORATORIES

The paper is the second part of the description of an interdisciplinary research concerning the modernization of laboratories at the Faculty of Civil Engineering, The Silesian University of Technology. This paper was focused on the conditions concerning the specific nature of laboratory works involving geotechnics and the methodology of pre-design studies performed in stages. The recapitulation contained the conclusions and a presentation of design solutions based on the conducted research

Joanna TYMKIEWICZ, Dorota WINNICKA-JASŁOWSKA, Małgorzata JASTRZĘBSKA

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 43–52

Article | 02-April-2020

Research on the Tunnel Geological Radar Image Flaw Detection Based on CNN

I. INTRODUCTION There are a large number of tunnel projects in the construction project. The quality defects of the tunnel may affect the construction schedule, increase the engineering cost, damage the mechanical equipment and even endanger the lives of the constructor. Geological radar detection method[1-2] is the mainstream method of tunnel lining detection at present, and has excellent performance in the detection of reinforcement and arch spacing, plain concrete structure, etc.[3]. However

He Li, Yubian Wang

International Journal of Advanced Network, Monitoring and Controls, Volume 5 , ISSUE 1, 44–53

Article | 26-August-2018

PASSIVE SYSTEMS IN RAISING ENERGY EFFICIENCY OF PUBLIC UTILITY BUILDINGS – ACTION SIMULATIONS

Public utility buildings are formally, structurally and functionally complex entities. Frequently the process of their design involves retroactive reconsideration of energy engineering issues, once a building concept has already been completed. At that stage minor formal corrections are made along with the design of the external layer of the building, satisfying or even exceeding applicable standards. Architecture students do the same when designing assigned public utility buildings. It can be

Marek A. WOŁOSZYN

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 2, 37–43

Article | 30-September-2021

TRAFFIC MODELING OF INTERSECTIONS ON VAJNORSKA STREET IN BRATISLAVA

Ambróz HÁJNIK, Veronika HARANTOVÁ, Alica KALAŠOVÁ, Kristián ČULÍK

Transport Problems, Volume 16 , ISSUE 3, 29–40

Research paper | 13-December-2017

Department of Mechanical and Industrial Engineering, University of Toronto,5 King’s College Road, Toronto, ON, M5S 3G8, Canada

Sang-Ho Kim, Kosuke Sekiyama, Toshio Fukuda

International Journal on Smart Sensing and Intelligent Systems, Volume 1 , ISSUE 3, 572–591

Article | 26-August-2018

THE USE OF HIGH MOISTURE SEWAGE SLUDGE IN THE CHP UNIT INTEGRATED WITH BIOMASS DRYING AND GASIFICATION

significant amount of waste heat is proposed. The legal situation of the sewage sludge treatment is briefly explained. The thermodynamic analysis of the cogeneration plant based on the gas piston engine integrated with drying and gasification units was conducted. The models of individual components of the system were developed using Engineering Equation Solver and MS Excel software. The maximum moisture of the fuel acceptable for the autonomic operation of the plant is calculated. The influence of the

Wojciech UCHMAN, Marcin JOB, Anna SKOREK-OSIKOWSKA

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 3, 147–152

Research paper | 13-December-2017

NEW HORIZON IN BIOIMAGING AND BIOMAGNETICS

functions, which include millisecond-level changes in functional regions and dynamic relations between brain neuronal networks. These techniques are leading medicine and biology into a new horizon through the novel applications of magnetism. A lecture on current limiter intended specifically for engineering students pursuing specialization with Electrical and Electronics engineering is proposed in this paper. The important information which doesn’t appear in text books are presented to the students. A

Shoogo Ueno, Masaki Sekino

International Journal on Smart Sensing and Intelligent Systems, Volume 1 , ISSUE 1, 300–314

Article | 02-April-2018

Comparative Analysis and Evaluation of Common Spectrum Correction Methods

Although there are many spectrum correction theories and implementations, they are individual to specific problem and lack of a comprehensive comparison. This brings down their practical value in engineering applications. To solve this problem, we hereby establish a spectrum analysis and correction system. Each method i.e. Energy BaryCenter Method, Ratioing, Phase Difference Method, Continuous Zoom and All-Phase Spectrum Analysis. Meanwhile summarizing their accuracy,universality,practicability

Liu Meichen, Liu Xu, Li Mei, Wei Wei

International Journal of Advanced Network, Monitoring and Controls, Volume 1 , ISSUE 2, 47–52

Article | 07-May-2018

The Establishment and Implementation of Information Network Security Plan

This paper explains the idea of information security and discusses the establishment of the security system of information network. By using the information system security engineering method, we will establish and improve the network security plan and disaster recovery plan through strict organization and management, adequate financial support, strong talent support and deep technical guarantee. This paper puts forward the overall strategic goal of the “people-oriented, to prevent the main

Wang Yuanyuan

International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 2, 104–107

Article | 07-May-2018

A Research of Perforation Plan-decision Based on Grey Cluster Relation

Perforation completion in oil and gas wells is the most important way of completion engineering, the optimization of perforation completion’s designing is influenced by a variety of factors. In order to get the ideal effect of perforation operation, in this paper, a Perforation plan-decision based on Grey Cluster Relation is putted forward. It aims to provide a scientific guidance for the Perforation. The simulation experimental results show that new models are effective, which offer one kind

Xue Jijun

International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 1, 86–91

Research Article | 23-August-2017

Analysis of local influences in structural details of the bridges

Adam RUDZIK, Stefan PRADELOK

Transport Problems, Volume 10 , ISSUE 1, 115–120

Article | 16-December-2013

RESEARCH ON LONGITUDINAL CONTROL ALGORITHM FOR FLYING WING UAV BASED ON LQR TECHNOLOGY

Linear Quadratic Regulator (LQR) is widely used in many practical engineering fields due to good stability margin and strong robustness. But there is little literature reports the technology that has been used to control the flying wing unmanned aerial vehicles (UAV). In this paper, aiming at the longitudinal static and dynamic characteristics of the flying wing UAV, LQR technology will be introduced to the flying wing UAV flight control. The longitudinal stability augmentation control law and

Yibo Li, Chao Chen, Wei Chen

International Journal on Smart Sensing and Intelligent Systems, Volume 6 , ISSUE 5, 2155–2181

Research Article | 13-December-2017

NANOSENSORS ENGINEERING:I. STRUCTURALLY MODULATED SnO2 NANOWIRES

The results of research aimed at the gas sensing nanowires (NWs) engineering are presented. Structurally modulated SnO2 NWs were obtained at 900oС in the modified vapor-solid process, allowing that NW morphology could be encoded in a programmable way along its length. PVD technique was used for Ti/Au electrical contacts deposition and gas sensitive nanoscale chemiresistors formation. Created nanostructures were characterized for their gas sensing performance. It was established that

S. Dmitriev

International Journal on Smart Sensing and Intelligent Systems, Volume 3 , ISSUE 4, 643–654

Article | 07-May-2018

The Portable Gas Analyzer Based on the Spectrum

mixture of different composition. Experimental results show that: this method can at once calculate a variety of harmful gas concentration and accuracy up to ± 3%. it has strong anti-jamming capability and is suitable for practical application of engineering.

Xu Shuping, Xu Pei, Dong Qiyu, Su Xiaohui

International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 1, 13–18

Research Article | 01-September-2017

DATA MINING WITH BIG DATA REVOLUTION HYBRID

Big Data concern large-volume, complex, growing data sets with multiple, autonomous sources. With the fast development of networking, data storage, and the data collection capacity, Big Data are now rapidly expanding in all science and engineering domains, including physical, biological and biomedical sciences. This paper presents a HACE theorem that characterizes the features of the Big Data revolution, and proposes a Big Data processing model, from the data mining perspective. This data

R. Elankavi, R. Kalaiprasath, R. Udayakumar

International Journal on Smart Sensing and Intelligent Systems, Volume 10 , ISSUE 5, 560–573

Article | 05-June-2013

MODEL BASED APPLICATION LEVEL MIDDLEWARE FOR DESIGN OF WIRELESS SMART CITY

existing network simulators replace field test during WSC design. The proposed platform reduces engineering cost and increases development efficiency. Network optimization is implemented to provide an automatic design of WSC.

Yujie Liang, Rendong Ying, Peilin Liu

International Journal on Smart Sensing and Intelligent Systems, Volume 6 , ISSUE 3, 1180–1199

Article | 07-May-2018

The Research and Implementation of 3D Scene Simulation of Camouflage

Aiming at the problems in the camouflage design of military engineering, such as strong subjectivity and unpredictable camouflage effect, etc. We propose a 3D camouflage scene simulation method based on MFC and Vega Prime technologies. On the basis of real DEM data in an area in American, we use 3D visualization technique to create terrain model and ground object model. The camouflage pattern is applied to the surface of the model by texture mapping technology, and real-time rendering is used

Yu Jun, Li Zhonghua, Hu Zhiyi, Dai Jun

International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 1, 126–129

Article | 30-November-2018

The Research of a New Iteration of the Circular Algorithm

algorithm can accurately measure the concentration of flue gas and keep the error within 3%. It can meet the design requirements and solve many kinds of gases at the same time. It is suitable for practical engineering applications.

Shuping Xu, Menyao Huang, Li Chen, Pei Xu

International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 1, 83–89

Article | 02-November-2017

EXTRACTING ELECTRIC POWER FROM HUMAN BODY FOR SUPPLYING NEURAL RECORDING SYSTEM

A powerful approach to the characterization of cellular electrical activity is electrical recording from cells or living tissues. The human central and / or peripheral nervous system has been a subject of study and fascination of the neuroscience and biomedical engineering communities for many decades. In this paper, we propose a new approach to feed implantable neural recording system, which based on extracting electrical power from human tissue warmth in order to supply a biomedical neural

G. Ben Hmida, A. L. Ekuakille, A. Kachouri, H. Ghariani, A. Trotta

International Journal on Smart Sensing and Intelligent Systems, Volume 2 , ISSUE 2, 229–245

Article | 24-June-2021

EXAMINATION OF MECHANICAL PROPERTIES OF WELDS OF DOCOL 1200M TOWARD APPLICATION IN COMPONENTS OF SPECIAL VEHICLES

Bożena SZCZUCKA-LASOTA, Tomasz WĘGRZYN, Tadeusz SZYMCZAK, Adam JUREK, Jan PIWNIK, Krzysztof Ireneusz WILCZYŃSKI

Transport Problems, Volume 16 , ISSUE 2, 33–43

research-article | 30-November-2017

STIFFNESS MODULE AND COMPRESSION STRENGTH OF POLYMER-TREATED SAND

1. INTRODUCTION According to the increasing demand of suitable soils under different types of foundation in the geotechnical engineering projects, many researchers try to find the best type of additives to enhance the strength of soils and to improve its mechanical properties. It is a big challenge to define the stress–strain behavior of the soil because it is complex and nonlinear. Young’s modulus (E) and the shear modulus (G) of the soil are not constant; it may significantly change with the

Maiasa MLHEM

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 1, 97–104

Article | 08-December-2019

EXPERIMENTAL MONITORING AND NUMERICAL MODELING OF THE THERMAL REGIME OF SELECTED TRACK SUBSTRUCTURES

The initial part of the paper characterizes major research activities at the Department of Railway Engineering and Track Management (DRETM), Faculty of Civil Engineering, University of Žilina. Subsequently, it outlines the state of art in the field of track substructure dimensioning for the non-traffic load in Slovakia and abroad. The second part of the paper deals with the method of collecting input parameters for numerical modeling of the track substructure freezing using SoilVision software

Libor IŽVOLT, Peter DOBEŠ, Stanislav HODÁS

Transport Problems, Volume 14 , ISSUE 4, 89–100

research-article | 30-November-2017

NON-METALLIC REINFORCEMENTS WITH DIFFERENT MODULI OF ELASTICITY AND SURFACES FOR CONCRETE STRUCTURES

Sandor SOLYOM, Matteo DI BENEDETTI, Anna SZIJÁRTÓ, György L. BALÁZS

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 2, 79–88

Article | 01-March-2015

L-SHAPED CANTILEVER PARALLEL - PLATE MEMS ACCELEROMETER DESIGN PARAMETERS USING A GRAVITATIONAL SEARCH ALGORITHM

satisfying all other engineering goals. The model was constructed in Msc Patran and Nastran software were calculated and model’s response was found. In this paper the optimal design from the theoretically derived gravitational search algorithm is compared to finite element model in order to ascertain its accuracy and verify the results.

Souad Oukil, Abdelmadjid Boudjemai, Nabil Boughanmi

International Journal on Smart Sensing and Intelligent Systems, Volume 8 , ISSUE 1, 65–89

Article | 05-September-2020

ALUMINUM ALLOY WELDING IN AUTOMOTIVE INDUSTRY

Bożena SZCZUCKA-LASOTA, Tomasz WĘGRZYN, Adam JUREK

Transport Problems, Volume 15 , ISSUE 3, 67–78

Article | 08-April-2018

Optimal Pricing for Service Provision in an IaaS Cloud Market with Delay Sensitive Cloud Users

Cloud computing has received a significant amount of attentions from both engineering and academic fields. Designing optimal pricing schemes of cloud services plays an important role for the success of cloud computing. How to set optimal prices of cloud resources in order to maximize these CSPs’ revenues in an Infrastructure as a Service (IaaS) cloud market while at the same time meeting the cloud users’ demand satisfaction is a challenging problem that CSPs should consider. However

Gang Fang, Xianwei Li

International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 2, 1–8

Article | 30-November-2018

Nuclear Fusion Power – An Overview of History, Present and Future

, most inertial confinement work has involved lasers. Recent work at Osaka University’s Institute of Laser Engineering in Japan suggests that ignition may be achieved at lower temperature with a second very intense laser pulse guided through a millimetre-high gold cone into the compressed fuel, and timed to coincide with the peak compression. This technique, known as ‘fast ignition’, means that fuel compression is separated from hot spot generation with ignition, making the process more practical. A

Stewart C. Prager

International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 4, 1–10

Article | 01-June-2016

A KRIGING-BASED UNCONSTRAINED GLOBAL OPTIMIZATION ALGORITHM

optimal searching direction into more promising regions. Kriging modeling which can fast construct an approximation model is the premise of performing optimization. Next, a new infill sampling criterion (ISC) called improved generalized expected improvement which round off Euclidean norm on variation of the optimal solutions of parameter θ to replace parameter g can effectively balance global and local search in IGEGO method. Twelve numerical tests and an engineering example are given to illustrate

Yaohui Li

International Journal on Smart Sensing and Intelligent Systems, Volume 9 , ISSUE 2, 927–952

Article | 01-December-2014

NUMERICAL ANALYSIS OF SLIDING FRICTION COEFFICIENT AND THE NORMAL PRESSURE BETWEEN THE CABLE WIRE

positive pressure, provides a method and basis for the practical engineering of steel wire in the ultimate friction shear stress accurately, set up and stay cable as layered slipping model provides important parameters of bending stress analysis. From the numerical simulation method analyzes the positive pressure parallel wire between the start. This paper first parallel wire contact problem of two cables are analyzed with the classical theoretical solution and the FEM software ANSYS, to verify the

Zhu Hui-ling, Zhu Xin-yin, Wang Yu-lin

International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 4, 1773–1788

Article | 10-April-2018

A New High-Precision Mode Acceleration Method for Calculating Frequency Response of Non-Classically Damped Systems

The modal truncation problem of non-classically damped systems is constantly encountered in the dynamic analysis of engineering. The present study is designed to calculate the frequency response functions of the non-classically damping systems accurately on account of the Neumann expansion theory and the frequency shifting technique. Considering the first and the second term influence of the Neumann expansion equations in the frequency response analysis of the viscoelastic systems, we could

Jingfang Shen, Peng Wang

International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 4, 152–156

research-article | 30-November-2020

FBG sensors for seismic control and detection in extradosed bridges

Introduction Structural health monitoring (SHM) has become increasingly valuable in recent years and is starting to be widely used in the field of structural engineering applications (Rodrigues et al., 2010). However, the necessity to have the precision resolution in real-time way in monitoring applications requires the manufacturer to look for new technologies. The novel technology found is the fiber Bragg grating (Sun et al., 2007; Vorathin et al., 2019). The implementation of such technology

Said Saad

International Journal on Smart Sensing and Intelligent Systems, Volume 14 , ISSUE 1, 1–13

Article | 01-March-2015

IN-SITU TEST OF PRESSURE PIPELINE VIBRATION BASED ON DATA ACQUISITION AND SIGNAL PROCESSING

systems, can not only obtain higher test accuracy and efficiency, but can also provide theory basis and technical support for solving the vibration problems of the same-type pipeline operation. It has a good promotion value in the engineering practice.

Huimin Hou, Cundong Xu, Hui Liu, Rongrong Wang, Junkun Jie, Lianying Ding

International Journal on Smart Sensing and Intelligent Systems, Volume 8 , ISSUE 1, 766–781

Research Article | 27-May-2018

POWER ISHITA DISTRIBUTION AND ITS APPLICATION TO MODEL LIFETIME DATA

real lifetime data from engineering, and its goodness of fit shows better fit over two-parameter power Akash distribution (PAD), twoparameter power Lindley distribution (PLD) and one-parameter Ishita, Akash, Lindley and exponential distributions.

Kamlesh Kumar Shukla, Rama Shanker

Statistics in Transition New Series, Volume 19 , ISSUE 1, 135–148

Research Article | 01-June-2011

TEMPERATURE CONTROL OF A CONTINUOUS STIRRED TANK REACTOR BY MEANS OF TWO DIFFERENT INTELLIGENT STRATEGIES

Continues Stirred Tank Reactor (CSTR) is an important subject in chemical process and offering a diverse range of researches in the area of the chemical and control engineering. Various control approaches have been applied on CSTR to control its parameters. This paper presents two different control strategies based on the combination of a novel socio-political optimization algorithm, called Imperialist Competitive Algorithm (ICA), and concept of the gain scheduling performed by means of the

Mohd Fua’ad Rahmat, Amir Mehdi Yazdani, Mohammad Ahmadi Movahed, Somaiyeh Mahmoudzadeh

International Journal on Smart Sensing and Intelligent Systems, Volume 4 , ISSUE 2, 244–267

Article | 01-March-2016

HIGH PRECISION TARGET LOCALIZATION METHOD BASED ON COMPENSATION OF ATTITUDE ANGLE ERRORS

regression to classify and obtain error prediction model of equivalent optical axis angle. Finally, the actual data is used to verify the compensation algorithm. The results show that the method can improve the accuracy of target localization efficiently, and has a certain value of engineering guidance and practical application.

Jialiang LIU, Wenrui Ding, Hongguang Li

International Journal on Smart Sensing and Intelligent Systems, Volume 9 , ISSUE 1, 169–190

Article | 30-November-2018

Research and Design of Next Generation Internet (IPV9) Datagram

/IP protocol cluster, the current version is IPv4 with 32-bit addresses. With the popularity of Internet applications, the limited address space defined by IPv4 has been exhausted. To expand the address space, the Internet Engineering Task Force (IETF) has designed the next generation IP protocol, IPv6, to replace IPv4. IPv6 redefines the address space, using a 128-bit address length that provides almost unlimited addresses. However, with the development and application of the Internet of things

Zhongsheng Wang, Jianping Xie, Zhao Lin, Wei Zhong

International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 1, 10–28

Research Article | 13-December-2017

SCALING ISSUES IN LARGE NETWORKS OF SMALL SENSORS: ENERGY AND COMMUNICATION MANAGEMENT

We discuss five scaling-related issues in robotics and robotic systems. They are unified by an understanding of the fundamental engineering constraints imposed by the essentially fixed fundamental strength of materials and the essentially fixed practical density at which energy can be stored. These constraints have profound effects on when big bodies are in danger of collapsing under their own weight and when small bodies are in danger of running out of fuel. The section on strength provides a

Mel Siegel

International Journal on Smart Sensing and Intelligent Systems, Volume 1 , ISSUE 1, 285–299

Article | 01-September-2012

IMPERIALIST COMPETITIVE ALGORITHM-BASED FUZZY PID CONTROL METHODOLOGY FOR SPEED TRACKING ENHANCEMENT OF STEPPER MOTOR

Precise control of the stepper motor has always been a topic of interest and also a challenging issue among control engineering researchers due to the nonlinear nature of the motor dynamic. Abrupt influences of the uncertainties on the model’s dynamic and control performance, on the other hand, must be taken into account for providing a control methodology including the characteristics of adaption and flexibility. Lack of these items in most of the classic control approaches results in

Amir Mehdi Yazdani, Ahmadreza Ahmadi, Salinda Buyamin, Mohd Fua’ad Rahmat, Farshad Davoudifar, Herlina Abd Rahim

International Journal on Smart Sensing and Intelligent Systems, Volume 5 , ISSUE 3, 717–741

Article | 10-April-2018

Homotopy Analysis for Periodic Motion of Time-delayed Duffing system

multiply periodic motions with time-delayed systems. This paper is presented a general approach to the analysis of periodic motions of time-delayed systems. Although here we only consider a non-autonomous Duffing system with linear and nonlinear time-delayed position feedback, HAM can be extended to solve other time-delayed systems, such as coupled oscillators with time-delayed, feedback control which may have significance for the control of some physical or engineering systems.

You Xiangcheng

International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 4, 157–160

Research Article | 12-February-2019

IMPACT OF ENVELOPE STRUCTURE ON THE SOLUTIONS OF THERMAL INSULATION FROM THE INSIDE

Bożena ORLIK-KOŻDOŃ, Agnieszka SZYMANOWSKA-GWIŻDŻ

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 123–134

Research Article | 08-February-2019

ANALYSIS OF CONCRETE CORROSION OF MANHOLE LOCATED NEAR SOURCE OF ODOROUS EMISSION

Bożena GIL, Barbara SŁOMKA-SŁUPIK, Katarzyna KOWALSKA, Karol JASIŃSKI

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 93–104

Research Article | 11-February-2019

21ST CENTURY THEATER – REGRESS OR PROGRESS?

Piotr OBRACAJ

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 55–66

Research Article | 12-February-2019

EFFECTS OF STAIRCASE ON THE SEISMIC BEHAVIOR OF RC MOMENT FRAME BUILDINGS

Azadeh NOORIFARD, Mohammad Reza TABESHPOUR

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 105–122

Research Article | 08-February-2019

A GIS BASED GRAPH ORIENTED ALGORITHMIC MODEL FOR POLY-OPTIMIZATION OF WASTE MANAGEMENT SYSTEM

Krzysztof GASKA, Agnieszka GENEROWICZ, Izabela ZIMOCH, Józef CIUŁA, Dariusz SIEDLARZ

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 151–159

Research Article | 08-February-2019

COMPREHENSIVE ENERGY DIAGNOSTICS CARRIED OUT IN A RESIDENTIAL BUILDING – A CASE STUDY

Dorota BARTOSZ

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 137–150

Research Article | 08-February-2019

PRELIMINARY ANALYSIS OF SEWAGE MANAGEMENT IN SOKÓLSKI DISTRICT

Iwona SKOCZKO, Katarzyna OSZCZAPIŃSKA

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 179–184

Research Article | 08-February-2019

STUDENTS’ ASSESMENT OF ENVIRONMENTAL CONDITIONS IN UNIVERSITY BUILDINGS – THE RESEARCH REPORT

Angelika LASIEWICZ-SYCH

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 41–53

Research Article | 08-February-2019

SPACE FOR UNIVERSITY STUDENTS: SPECIFIC REQUIREMENTS FOR “SELF-LEARNING” ENVIRONMENT – THEORETICAL APPROACH

Angelika LASIEWICZ-SYCH

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 31–40

Research Article | 08-February-2019

THE NEW URBANIST PRINCIPLE OF QUALITY OF LIFE FOR URBAN REGENERATION

Monika Maria CYSEK-PAWLAK

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 21–30

Research Article | 08-February-2019

RESEARCH ON THERMAL CONDITIONS IN VENTILATED LARGE SPACE BUILDING

Agnieszka PALMOWSKA, Gabriel MICZKA

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 169–178

Research Article | 12-February-2019

TESTS OF JOINTS IN AAC MASONRY WALLS

Iwona GALMAN, Radosław JASIŃSKI

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 79–92

Research Article | 08-February-2019

POSSIBILITIES OF USING POST-CONSUMER WOOD WASTE AS A FUEL IN A CEMENT PLANT

Małgorzata KAJDA-SZCZEŚNIAK, Tomasz J. JAWORSKI, Agata WAJDA

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 161–167

Research Article | 08-February-2019

STRUCTURAL HEALTH MONITORING SYSTEM OF A CONCRETE CABLE-STAYED BRIDGE

Jan BILISZCZUK, Paweł HAWRYSZKÓW, Marco TEICHGRAEBER

Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 69–77

Research Article | 23-October-2017

USING A WHEEL PAIR WITH A COUNTER-FLANGE TO PREVENT DERAILMENT

The authors propose an engineering solution for a wheel pair with a counter-flange that satisfies the existing standards of vertical and horizontal dynamics and the movement stability index. An improved profile of a rail wheel with a counter-flange is developed. It provides additional contact in the horizontal plane in the situation of transverse vibrations of the wheel pair against the rail track, adds to carriage stability and increases the wheel’s resistance to derailment when passing a

Yuriy Iv. OSENIN, Larysa DEGTYAREVA, Galyna OSENINA, Oksana SERGIENKO

Transport Problems, Volume 12 , ISSUE 2, 13–18

Research Article | 24-August-2017

A THREE-PARAMETER WEIGHTED LINDLEY DISTRIBUTION AND ITS APPLICATIONS TO MODEL SURVIVAL TIME

In this paper a three-parameter weighted Lindley distribution, including Lindley distribution introduced by Lindley (1958), a two-parameter gamma distribution, a two-parameter weighted Lindley distribution introduced by Ghitany et al. (2011) and exponential distribution as special cases, has been suggested for modelling lifetime data from engineering and biomedical sciences. The structural properties of the distribution including moments, coefficient of variation, skewness, kurtosis and index

Rama Shanker, Kamlesh Kumar Shukla, Amarendra Mishra

Statistics in Transition New Series, Volume 18 , ISSUE 2, 291–310

Article | 14-October-2020

Rheological Properties of Pullulan and Aloe Vera Nanofiber Solutions

Haifa El-sadi, Shady Sally, Alex Bossart, Dilhan Kalyon

International Journal of Advanced Network, Monitoring and Controls, Volume 5 , ISSUE 3, 9–15

Article | 26-August-2018

RISK ASSESMENT OF WATER VAPOR CONDENSATION IN WALL MADE OF HEMP-LIME COMPOSITE

Przemysław BRZYSKI

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 2, 47–56

Article | 26-August-2018

PREVENTING IRREGULARITY EFFECTS OF INFILLS THROUGH MODIFYING ARCHITECTURAL DRAWINGS

Azadeh NOORIFARD, Mohammad Reza TABESHPOUR, Fatemeh Mehdizadeh SARADJ

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 2, 77–92

Article | 26-August-2018

THE ANALYSIS OF THE DIRECT FOUNDATION WITH ENERGY FOUNDATIONS ON THE BASIS OF THE OFFICE BUILDING “A4 BUSINESS PARK” IN KATOWICE AT FRANCUSKA STREET

Małgorzata JASTRZĘBSKA, Barbara WAWRZYŃCZYK

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 2, 65–76

Article | 26-August-2018

APPLICATION OF HIERARCHICAL ANALYSIS METHOD TO DESIGN THE STRUCTURAL PARTITIONS WITH DIFFERENT MATERIAL AND STRUCTURAL SOLUTIONS FOR WINDOW GLAZING

Artur NOWOŚWIAT, Monika LESZCZYŃSKA

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 3, 95–104

Article | 26-August-2018

TRIAXIAL TESTS ON WEAK COHESIVE SOILS – SOME PRACTICAL REMARKS (PART 1)

Magdalena KOWALSKA, Małgorzata JASTRZĘBSKA

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 3, 71–80

Article | 26-August-2018

MODELLING OF DECISION-MAKING FRAMEWORK FOR SELECTION TECHNOLOGICAL ADEQUACY SYSTEM MEDIA FAÇADES

Jasna ČIKIĆ TOVAROVIĆ, Jelena IVANOVIĆ ŠEKULARAC, Nenad ŠEKULARAC

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 3, 55–70

Article | 26-August-2018

TRIAXIAL TESTS ON WEAK COHESIVE SOILS – SOME PRACTICAL REMARKS (PART 2)

Małgorzata JASTRZĘBSKA, Magdalena KOWALSKA

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 3, 81–93

Article | 27-August-2018

ANALYSIS OF OSCILLATORY MOTION OF SIN GIRDERS WITH SEMIRIGID JOINTS

Witold BASIŃSKI

Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 4, 55–65

Article | 27-August-2018

VIBRATION PROPAGATION IN SUBSOIL: IN-SITU TESTING AND NUMERICAL ANALYSES

Stefan PRADELOK, Marian ŁUPIEŻOWIEC

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 1, 79–86

Article | 27-August-2018

FEM ANALYSIS OF CORRUGATED WEB GIRDERS REINFORCED WITH TENSIONED DIAGONAL BRACES 

Witold BASIŃSKI, Zbigniew KOWAL

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 1, 65–78

Article | 27-August-2018

INVESTIGATIONS INTO THE RESISTANCE OF SIN GIRDERS REINFORCED WITH TENSIONED DIAGONAL BRACES

Witold BASIŃSKI, Zbigniew KOWAL

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 1, 53–64

Article | 27-August-2018

EARTH STRUCTURES STABILITY UNDER RAPID DRAWDOWN CONDITIONS

Zofia ZIĘBA, Michał MOLENDA, Kinga WITEK

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 1, –

Article | 28-August-2018

RELIABILITY-BASED EVALUATION OF LOSS DUE TO DISTRIBUTION OF NONSTRUCTURAL COMPONENTS IN HEIGHT

Leila HAJ NAJAFI, Mohsen TEHRANIZADEH

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 77–98

Article | 28-August-2018

STRUCTURAL BEHAVIOR OF NORMAL AND HIGH-STRENGTH CONCRETE WALLS REINFORCED WITH GLASS FIBER-REINFORCED POLYMER BARS UNDER ECCENTRIC LOAD

Yaarub Gatia ABTAN, Hassan Falah HASSAN

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 55–63

Article | 28-August-2018

RELIABILITY ANALYSIS OF RIGID PILE CAPS USING AN ITERATIVE STRUT-AND-TIE MODEL

José Milton de ARAÚJO

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 65–75

Article | 28-August-2018

ACOUSTIC EVALUATION OF A NEW MODULAR SYSTEM FOR GREEN ROOFS AND GREEN WALLS

Maria MANSO, João Paulo CASTRO-GOMES, Michal MARCHACZ, Marcin GÓRSKI, Leszek DULAK, Rafał ZUCHOWSKI

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 99–108

Article | 28-August-2018

EFFECT OF METAKAOLIN DEVELOPED FROM LOCAL NATURAL MATERIAL SOORH ON WORKABILITY, COMPRESSIVE STRENGTH, ULTRASONIC PULSE VELOCITY AND DRYING SHRINKAGE OF CONCRETE

Abdullah SAAND, Manthar Ali KEERIO, Daddan khan BANGWAR

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 115–122

Article | 28-August-2018

DAYLIGHT PREDICTION IN INDIVIDUAL FLOORS USING WELL INDEX

Mahsan MOHSENIN, Jianxin HU

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 109–114

Article | 28-August-2018

THAUMASITE NON-SULPHATE ATTACK AT AMBIENT TEMPERATURE AND PRESSURE

Barbara SŁOMKA-SŁUPIK, Adam ZYBURA

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 3, 73–80

Article | 28-August-2018

INNOVATIVE STEEL FIBERS AND THEIR EFFECT ON FIBER DISTRIBUTION IN BEAMS - EXPERIMENTAL INVESTIGATIONS

Michael HUSS, Nguyen Viet TUE

Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 3, 103–108

No Record Found..
Page Actions