Article | 30-November-2018
I.
OVERVIEW OF 5G WIRELESS COMMUNICATION TECHNOLOGY
A.
5G wireless communication technology
With the continuous development of the information industry, wireless communication technology has become an important part of people’s production and life. The Italian Marconi conducted radio transmission and reception experiments in 1897, a move that marked the era of human access to wireless communications. Since then, wireless communication technology has been greatly developed in both theoretical
Junying Bai,
Yongli An,
Ruihua Sun
International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 2, 86–92
Research Article | 27-February-2017
Summary. The article discusses the possibility of the application of the NFC technology as a system of selling tickets in passenger rail transport. The NFC (Near Field Communication) technology is a wireless and contactless technology of transmission of radio data over short distances (max. 5 cm). This technology is very similar to the RFID (Radio Frequency Identification) technology. It is assumed that this technology will spread rapidly and that already in 2015 around 85% of the payments in
Henryk KOMSTA,
Eva BRUMERCIKOVA,
Bibiana BUKOVA
Transport Problems, Volume 11 , ISSUE 3, 43–53
Article | 23-April-2018
Treadmill is the commonest method to get a good health, but traditional treadmill has limited functions and low intelligence. While embedded technology implements special function and is controlled by internal computer system. Putting embedded technology into treadmill can enhance the intelligence and add extra functions. In this paper, system structure and work way of treadmill were analyzed scientifically through embedded technology and the design of controlling system. The system hardware
Jiujian Cui,
Yan Wu
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 4, 171–175
Article | 03-November-2020
Proteins G and A coated on agarose have been extensively used in affinity chromatography. Protein G will bind to all four subclasses of human IgG and protein A to the subclasses IgG1, IgG2, and IgG4. This IgG binding ability of protein G and protein A has been used in a red cell affinity column technology developed for the detection and identification of IgG red cell antibodies. When serum or plasma is incubated in a microcolumn with red blood cells (RBCs) that express the appropriate antigens
Kayla D. Champagne,
Peggy Spruell,
Jane Chen,
Leslie Voll,
Gloria Schlanser,
Marilyn Moulds
Immunohematology, Volume 14 , ISSUE 4, 149–151
Report | 26-October-2019
Antibody titration is traditionally performed using a conventional test tube (CTT) method, which is subjected to interlaboratory variations because of a lack of standardization and reproducibility. The aim of this study is to compare newer methods such as gel column technology (GCT) and erythrocyte magnetized technology (EMT) for antibody titration in terms of accuracy and precision. Patient serum samples that contained immunoglobulin G (IgG) red blood cell (RBC) alloantibodies of a single
Anju Dubey,
Atul Sonker,
Rajendra K. Chaudhary
Immunohematology, Volume 31 , ISSUE 1, 1–6
Article | 28-August-2018
The paper is the first, introductory part to the description of an interdisciplinary research project in the modernization of laboratories at The Faculty of Civil Engineering, The Silesian University of Technology. The scope of the paper is to disseminate the current state of knowledge of ergonomics and issues involved in the technology of laboratory processes, describing the methodology of experiments carried out in geotechnical laboratories, their equipment and spatial requirements in view of
Dorota WINNICKA-JASŁOWSKA,
Małgorzata JASTRZĘBSKA,
Joanna TYMKIEWICZ
Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 35–41
Article | 07-May-2018
This paper take the development of virtual campus roaming system as an example. Aiming at the defects of the different kinds of bounding boxes collision detection technology, analyzes the advantages of the hybrid hierarchical bounding box collision detection algorithm based on spheres and oriented bounding box, and described the way to construct it. Finally, the algorithm is tested in the VC and Unity3d engine, a good result is obtained.
Wan Chao,
Liu Pingping,
Hong Bo
International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 2, 84–88
Article | 10-April-2021
reciprocal to the highest sample dilution showing 1+ agglutination. Dithiothreitol (DTT) is used for the inactivation of IgM antibodies and, therefore, its routine use in immunohematology laboratories is recommended.5 Although the column agglutination technology (CAT) has been described as superior in objectivity and reproducibility when compared with CTT because of the possible overestimation of the antibody titer when using CAT, it has, up to now, only been recommended for antibody identification and
S.S. Datta,
S. Basu,
M. Reddy,
K. Gupta,
S. Sinha
Immunohematology, Volume 37 , ISSUE 1, 25–32
Article | 24-June-2021
One of the effective techniques to strengthen the subgrade is boring and mixing technology, which is based on the immersion of vertical elements – piles into the subgrade. This method of strengthening significantly affects the stress state of the track superstructure. Two options of the placement of strengthening elements are examined in this paper. To determine the influence of position of strengthening elements on the stress state of the track superstructure, appropriate finite-element
Oleksii TIUTKIN,
Larysa NEDUZHA,
Jan KALIVODA
Transport Problems, Volume 16 , ISSUE 2, 189–197
Article | 18-October-2020
Failures of Rh immune globulin (RhIG) prophylaxis occur when the dose is too small. We report a test using a gel technology (GT) method to replace the Kleihauer–Betke (K–B) test to assess fetomaternal hemorrhage (FMH) and assist in determining the minimum necessary dose of RhIG. Cord blood (O, D+) was mixed with adult blood (O D–) to mimic an FMH of 10 mL, 20 mL, 28 mL, and 40 mL. Test samples were incubated with anti-D at known concentrations and centrifuged. The supernatant
John R. Fernandes,
Ronny Chan,
Ahmed S. Coovadia,
Marciano D. Reis,
Peter H. Pinkerton
Immunohematology, Volume 16 , ISSUE 3, 115–119
Article | 18-March-2018
Short description of higher education study programme creation and evaluation process is stated. The study pointed out the difficulties of up-dating study programmes in connection with innovative technology trends in the relevant field of knowledge. Blockchain technology and Internet of Things as emerging digitalization trends in logistics and transport are considered together with three relevant bachelor study programmes. The first proposal of innovation inclusion in study programmes is
Genadijs GROMOVS,
Mika LAMMI
Transport Problems, Volume 12 , ISSUE SE, 23–34
research-article | 30-November-2020
I.
INTRODUCTION
Bluetooth is a short-distance wireless data communication technology, which can connect multiple devices at the same time. It has the characteristics of low cost, fast speed, convenient use and low power consumption [1]. Data transmission by frequency hopping spread spectrum technology has high security and anti-interference ability, and establishes data transmission channels for fixed and mobile devices. Therefore, it widely used in mobile phones, wireless headsets, notebook
Jian Wang,
Hui Liang
International Journal of Advanced Network, Monitoring and Controls, Volume 6 , ISSUE 2, 32–36
Article | 30-March-2018
The aim of this paper is to analyse the mechanical properties of the weld steel structure of car body truck frames after laser welding. The best welding conditions involve the use of proper materials and alloy elements in steel and filer materials, in addition to welding technology, state of stress and temperature of exploitation. We present for the first time the properties of steel track structures after laser welding with micro-jet cooling. Therefore, good selection of both welding
Jan PIWNIK,
Bożena SZCZUCKA-LASOTA,
Tomasz WĘGRZYN,
Wojciech MAJEWSKI
Transport Problems, Volume 12 , ISSUE SE, 107–114
Article | 14-October-2020
Currently, ABO serum grouping performed by gel technology employs a red cell diluent containing EDTA (MTS Diluent 2 Plus™) that does not permit extended storage of the red cell suspensions. A diluent currently used for suspension and long-term storage of reagent red cells for antibody detection and identification (Ortho 0.8% Red Cell Diluent™) was evaluated for use with A1 and B cells. Because this diluent does not contain EDTA, testing was limited to EDTA samples. As a comparison
E. Ann Steiner,
LouAnn Dake
Immunohematology, Volume 17 , ISSUE 2, 53–56
Article | 30-November-2020
I.
THE GENERATION OF DECIMAL NETWORK
Nowadays, the network is highly valued by all countries in the world. The core of Internet technology is IPv4 and IPv6, and it is developed by the United States. The IPv4 protocol address space is 232, and it has some shortcoming with the development of the Internet, in theory, IPv6 has 2128 addresses, but only one eighth of the addresses can be assigned to end users, so IPv6 also has certain limitations.
Decimal network working group joint Shanghai network
Zhang Liu,
Shuyang Li
International Journal of Advanced Network, Monitoring and Controls, Volume 6 , ISSUE 1, 50–56
Article | 30-November-2018
array can provide high beamforming gain, thereby obtaining sufficient link balance. the amount[1].
At present, Bell Labs USA has achieved significant capacity improvement and related efficiency improvements by using large-scale MIMO technology (multi-input and multi-output technology) in the millimeter wave band. With prototypes with peak transmission rates in excess of 50 Gbps, Bell Labs has successfully achieved spectral efficiencies of up to 100 bps / Hz in the 28 GHz millimeter-wave band, and
Bai Junying,
An Yongli
International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 3, 73–78
Article | 30-November-2018
Limei Ma,
Dongmei Zhao,
Yijun Gao,
Chen Zhao
International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 2, 35–39
Article | 03-November-2020
Both column (gel) agglutination technology and red cell affinity column technology (ReACT™) have been approved by the Food and Drug Administration for antibody detection and identification. Parallel studies using these two methods were performed on 100 samples to evaluate their sensitivity, advantages, and disadvantages. Sixteen significant antibodies, anti-D(2), -C(1), -E(1), -c(1), -C,D(1), -K(4), -S(1), -Fya(3), -Jka(1), and -Jkb(1), were found during the study. MTS-Gel detected one
Sauvai I. Chanfong,
Sherri Hill
Immunohematology, Volume 14 , ISSUE 4, 152–154
Article | 11-January-2021
innovation is the core benefit of the development of China’s information and communication technology, and it is imperative!
II.
THE STRUCTURAL FLAWS OF THE INTERNET ARE WELL KNOWN AROUND THE WORLD
China is no exception to the threat posed by state-level organized and high-intensity cyber confrontation to all countries in the world. In order to cope with state-level cyber confrontation, it is impossible not to change the situation that core technologies and key cyber infrastructure are in the hands of
Aiqun Wu,
Zhangxing Gao
International Journal of Advanced Network, Monitoring and Controls, Volume 5 , ISSUE 4, 75–81
Article | 01-June-2016
Virtual Instrument technology, based on DataSocket, is the product combined with computer technology, network communication technology and instrumentation technology. The paper has described some concepts about virtual instrument and LabVIEW. Now concerning the characteristic of equipment in grassroots units that equipment have diverse models and could be widespread distributed, and it could cause increasing difficulty of repair and maintenance about equipment. Thus, the paper proposed Virtual
Wu Tao,
Liu Zhihua,
Liang Miaoyuan
International Journal on Smart Sensing and Intelligent Systems, Volume 9 , ISSUE 2, 491–508
Article | 09-April-2018
In order to know the operation condition before working, and reduce the risk of serious accidents of coal production industry. In this paper, by analyzing the characteristics of the environment of underground mine, using virtual reality technology, combined with the 3d Max modeling techniques and VC++ calling the OpenGL graphics interface techniques, the models are well optimized based on progressive mesh LOD algorithm for edge collapse. Using high-tech computer technology to simulate realistic
Pingping Liu,
Zhaopan Lu
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 3, 1–5
Article | 30-November-2018
protection, the construction of data security grading system, based on different security levels to determine the open rights of data, to ensure the efficiency of business execution and smooth management.
Internet of things technology is developing rapidly, but the corresponding infrastructure and security protection capabilities do not adapt to it. Network security is the biggest hidden danger of the power Internet of things. On the one hand, non-ip communication protocol is often used to transmit data
Jiao Longbing
International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 4, 68–73
Article | 07-May-2018
With the continuous development of modern information technology, Computer network and multimedia technology have been used more and more widely. Due to the diversity, integration, control, interactivity, and real-time characteristics of multimedia technology, the application of multimedia technology in teaching has greatly changed the traditional teaching mode of instilling knowledge to students in a single way and in a simple manner. It used its super integrated management of text, text
Xing Bo
International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 1, 122–125
Article | 24-April-2018
Big data technology refers to the rapid acquisition of valuable information from various types of large amounts of data. It can be divided into 8 technologies: data acquisition, data access, infrastructure, data processing, statistical analysis, data mining, model prediction and results presentation. The paper presents improved statistical analysis method based on big data technology. A statistical analysis model in big data environment is designed to extract useful information features from
Hongsheng Xu,
Ganglong Fan,
Ke Li
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 4, 26–30
Research Article | 21-April-2017
This article aims to identify the main requirements to strengthen the railroad industry in Santa Catarina by using technology roadmapping. The railway industry is composed of carriers, manufacturers, suppliers, operators, logistics, services and education. The survey aimed to provide guidelines for the Federation of the State of Santa Catarina Industry (FIESC) to develop its strategic plan for the next eight years. Based on the survey, the roadmap defined vision, mission, a list of key concepts
Acires DIAS,
Jonny C. DA SILVA,
Heitor H. KAGUEIAMA,
Carolina R. HADDAD,
Mauricio URIONA M.,
Álvaro G.R. LEZANA,
Dante L. JULIATTO
Transport Problems, Volume 10 , ISSUE SE, 29–36
Article | 30-November-2018
I.
INTRODUCTION
Virtual reality technology[1,2] can create an environment similar to the real society and enable people to interact with the virtual environment with multidimensional information. The campus roaming system on the basis of geography, virtual reality, multimedia, broadband and other technologies, combining the content of attributes and geospatial information, constructs a realistic virtual campus environment. Users can access the campus landscape through computer networks and use
Wenjing Xu,
Pingping Liu,
Zhaopan Lu
International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 4, 69–76
Article | 03-November-2020
Preliminary reports have suggested that microcolumn technology might be too sensitive for direct antiglobulin testing (DAT). We studied 228 samples from patients with autoimmune diseases and 30 samples from healthy controls to determine the sensitivity of column techniques. Both Sephadex® gel and protein A/G columns were compared with manual methods using rabbit or murine polyspecific reagents. Of the 187 samples that were negative by both manual methods, an additional 29 (15%) and 42 (22
Joann M. Moulds,
Laura Diekman,
T. Denise Wells
Immunohematology, Volume 14 , ISSUE 4, 146–148
Article | 30-November-2018
I.
INTRODUCTION
At present, software radio technology is widely used in wireless communication, its basic idea is to use hardware as the basic platform of wireless communication. The A/D sampling data of signals are processed by various algorithms, and various communication functions are realized by means of software. This paper discusses the automatic gain control (AGC) algorithm in software radio. The function of AGC is to automatically adjust the gain of the amplifier according to the
Wu Hejing
International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 4, 92–96
Article | 30-November-2018
I.
INTRODUCTION
With the rapid popularization of the practical application of wireless communication system, the number of wireless communication users and user service demand have increased exponentially, but the radio spectrum resources which can be used in wireless communication services are extremely limited. The contradiction between the increasing demand of wireless service and the limited radio spectrum resources is becoming more and more prominent. MIMO multi antenna technology is a new
Sun Ruihua,
Bai Junying,
An Yongli
International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 3, 61–69
Article | 08-April-2018
This article selects load balancing system technology to analyze, combines the live migration technology of virtual machine, and studys the frame of virtual machine live migration as well as the mathematical model applied to concrete process of the migration. The article presents that the process of combining the specific strategies of load balance to the frame of live migration, that the simulation experiment and conclusion to this total process. The study takes Eucalyptus as experimental
Sun Hong,
Wang Weifeng,
Chen Shiping,
Xu Liping
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 2, 17–28
Article | 01-March-2015
In order to allow consumers to trace to the whole process of beef breeding, production and processing after purchasing beef, to achieve smart, fast and practical goals for quality and safety of beef traceability system, B / S (Browser / Server) mode architecture is used to build quality beef traceability system based on RFID technology in this paper. First, the system is analyzed, the structure and database system are designed and the key technologies to achieve traceability system is explored
Wanli Zhang,
Xiaoying Yang,
Qixiang Song
International Journal on Smart Sensing and Intelligent Systems, Volume 8 , ISSUE 1, 782–800
Research Article | 10-March-2013
To solve the problems of instability of agricultural robot when avoiding obstacles, a kind of navigation method which combined monocular visual navigation technology and remote monitoring technology was proposed: using the centerline method to extract the navigation path to achieve visual navigation; the monitoring center received two-way real-time image signals of the agricultural robot, when the agricultural robot met the obstacle or other situations, the remote monitoring center would start
Yuanjie Wang,
Fuzeng Yang,
Tao Wang,
Qiang Liu,
Xiudong Xu
International Journal on Smart Sensing and Intelligent Systems, Volume 6 , ISSUE 2, 466–481
Article | 01-March-2015
With the development of information technology, the rapid development of microelectronics technology, image information acquisition and use is also increasing, sensor technology also unceasingly to reform. A single sensor information obtained is limited, often can not meet the actual needs, in addition, different sensors have the advantage of the imaging principle and its unique, as in color, shape characteristics, band access, spatial resolution from the aspects of all have their own
Zhang Ning,
Zhu Jinfu
International Journal on Smart Sensing and Intelligent Systems, Volume 8 , ISSUE 1, 480–496
Article | 14-October-2020
The incidence of positive autocontrol test results with column agglutination technology is a concern. This study investigates the incidence and significance of positive autocontrols in the ID Micro Typing System™(gel) and the Gamma ReACT™(ReACT). The study encompassed a total of 1021 randomly selected samples from patients and 95 samples from donors collected during 1 month. The autocontrol testing was carried out according to the manufacturer’s instructions for the column
J.E. Courtney,
J.L. Vincent,
A.J. Indrikovs
Immunohematology, Volume 17 , ISSUE 2, 50–52
Article | 26-October-2019
by BioArray Solutions (Immucor, Warren, NJ) is one of the commercial DNA array platforms currently available to predict HEAs by DNA analysis. This technology provides a useful tool to increase the inventory of antigen-negative RBC units and prevent immunization of patients who require chronic transfusion by providing compatible RBC units based on matching by DNA testing.
Cinzia Paccapelo,
Francesca Truglio,
Maria Antonietta Villa,
Nicoletta Revelli,
Maurizio Marconi
Immunohematology, Volume 31 , ISSUE 2, 81–90
Article | 23-April-2018
According to the development of information technology and the management of metallurgical enterprises, the paper puts forward the design scheme of the information platform for metallurgical enterprises, introduces the structure and function of the new type of metallurgical information platform. It realize loop online collection, hierarchical data computation, distributed database management and global WEB publishing capability. And improve the level of production automation, reduce energy
Ma Dandan,
Bai Jing
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 4, 1–4
Research Article | 21-April-2017
Transport accessibility can be analyzed using a number of different methods. The problem with each of them is the difficulty of obtaining data to measure this phenomenon The focus of this article and its main goal are to present methods and tools for gathering data on road traffic; thanks to modern information technology, it is possible to collect real data without the need for large-scale and highly capital-intensive measurements. The application of modern information technology (IT) presented
Bartosz BARTOSIEWICZ,
Szymon WIŚNIEWSKI
Transport Problems, Volume 10 , ISSUE 3, 87–98
research-article | 30-November-2018
Introduction
The successful implementation and sustained use of health information technology (IT) is difficult to achieve (Heeks, 2006; Wears & Berg, 2005), in large part, because of clinicians’ resistance to the adoption of new technology (Buntin, Burke, Hoaglin, & Blumenthal, 2011; Massaro, 1993). At the root of clinicians’ resistance to health IT are individual beliefs, which are individuals’ cognitive evaluations of the consequences of a particular behavior (Agarwal, 2000). Individual
Christina T. Yuan,
Gerald C. Kane,
Jason M. Fletcher,
Ingrid M. Nembhard
Journal of Social Structure, Volume 20 , ISSUE 3, 29–49
Article | 24-December-2021
flow in CA. A Weigh in Motion (WIM) technology can be used as an effective traffic management control system in the CA region. The WIM technology is designed to control axle and gross vehicle weight in motion. It has a wide range of applications, including pavement and bridge weight control, traffic legislation and state regulations. The WIM technology has advantages over conventional static weighing as it does not interrupt traffic flow by creating queues at monitoring stations. The WIM technology
Jong woo KIM,
Young woo JUNG,
Ainura UTEBAYEVA,
Zhuldyz KAMALIYEVA,
Neil COLLINS,
Dastan SARBASSOV,
Janay SAGIN,
Raushan AMANZHLOVA
Transport Problems, Volume 16 , ISSUE 4, 149–162
Article | 10-April-2018
The intelligent logistics distribution of e-commerce is the computer technology and modern hardware equipment, software system and advanced management tools used by the logistics distribution enterprise. Data mining technology is the process of finding the probability distribution of random variables from a large number of source data. Automation of intelligent logistics system can improve labor productivity and reduce the error of logistics operation. This paper proposes design and development
Yi Wang,
Xue Bai,
Haoyuan Ou
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 3, 163–167
Article | 28-August-2018
The paper is the second part of the description of an interdisciplinary research concerning the modernization of laboratories at the Faculty of Civil Engineering, The Silesian University of Technology. This paper was focused on the conditions concerning the specific nature of laboratory works involving geotechnics and the methodology of pre-design studies performed in stages. The recapitulation contained the conclusions and a presentation of design solutions based on the conducted research
Joanna TYMKIEWICZ,
Dorota WINNICKA-JASŁOWSKA,
Małgorzata JASTRZĘBSKA
Architecture, Civil Engineering, Environment, Volume 10 , ISSUE 2, 43–52
Research Article | 08-February-2019
Abstract
The article presents an integrated (inferential) system of computer assistance in waste management designed in component-based technology. The system allows for the implementation of individual elements (system components) with native and managed programming languages and performance technologies, ensuring easy integration of those components into one coherent, cooperating whole. One of the key issues involves the placement of the objects, events and conducted spatial (geographical
Krzysztof GASKA,
Agnieszka GENEROWICZ,
Izabela ZIMOCH,
Józef CIUŁA,
Dariusz SIEDLARZ
Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 151–159
Research Article | 15-February-2020
the area of automated animal health monitoring. In this research, we have identified specific diseases which are common in dairy animals which can be identified through the use of non-invasive, low-cost, sensor technology. These diseases have been mapped to specific aspects of animal behaviour that have been mapped to the three sensors which are most significant to identify these diseases. The identified sensors will be shown to be vital in the development of the next generation of health
Amruta Helwatkar,
Daniel Riordan,
Joseph Walsh
International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 5, 1–6
Article | 16-April-2018
Guide Dogs Association of South Australia and Northern Territory (Guide Dogs SA.NT) provides Orientation & Mobility (O&M) programs for people with vision impairment, including training in the use of Electronic Travel Aids (ETAs). Recent developments in wayfinding technology have included introduction of specialised Global Positioning System (GPS) devices for people with vision impairment. This article describes considerations that were made by Guide Dogs SA.NT in selecting wayfinding
Adrian Riessen, B.App.Sc., Grad.Cert.Health, M.Spec.Ed.,
Alison Ryan, B.App.Sc., M.Spec.Ed.,
Mark Battista, B.Sec.Ed., M.Spec.Ed.
International Journal of Orientation & Mobility, Volume 2 , ISSUE 1, 73–80
research-article | 08-October-2021
pollution, effective and ecological methods of purification and deodorization as well as effective systems of air quality control and monitoring. Due to the continuous development of industry and economy, methods of cleaning polluted air are an extremely important tool, which can be divided into four main groups: combustion, adsorption, absorption and biological methods [7]. The use of an appropriate air purification technology is conditioned by several factors: the type and concentration of pollutants
Anita PARZENTNA-GABOR,
Krzysztof BARBUSIŃSKI,
Damian KASPERCZYK
Architecture, Civil Engineering, Environment, Volume 14 , ISSUE 3, 89–101
Article | 01-April-2020
ISBT 128 will be implemented in the United States during the next two years. In addition to improving unit traceability and lookback tracking, this information technology standard has the power to detect and prevent errors in data entry by using data identifiers and check characters. Additionally,its ability to encode special testing results such as CMV and RBC phenotype on a label provides laboratories a computerized mechanism to verify the accuracy of such labels.
Suzanne H. Butch,
Patricia B. Distler
Immunohematology, Volume 22 , ISSUE 1, 30–36
Article | 01-September-2015
Human daily activity segmentation utilizing smartphone sensing technology is quite new challenge. In this paper, the segmentation method combining statistical model and time series analysis is designed and implemented. According to designed partition procedure, real measured accelerometer datasets of human daily activities are tested. The segmentation performance of sliding window autocorrelation and minimized contrast algorithms is analysed and compared. Experiments demonstrate the
Yin Ling
International Journal on Smart Sensing and Intelligent Systems, Volume 8 , ISSUE 3, 1624–1640
Article | 01-September-2016
To solve the problem in conventional technologies of analysis and integration in micro scale of reservoir core, virtual reality and visualization technology can be used in the research of reservoir core microstructure. Integrated with practical research and application works, the modeling method of reservoir core and the database store method of microstructure model are analyzed and discussed. A skeleton extraction algorithm based on maximum circumsphere method is proposed to achieve the
Niu Wenjie,
Xu Qingqing,
Xu Ying,
Xu Guohui,
Wang Xiaobin,
Zheng Shipo,
Liu He
International Journal on Smart Sensing and Intelligent Systems, Volume 9 , ISSUE 3, 1479–1496
mini-review | 27-December-2020
the surrounding environment (Ahmad et al. 2017). Biofloc technology (BFT) applications are one of the best aquaculture systems and contribute to the achievement of sustainable development and desired objectives for a clean environment (Bossier and Ekasari 2017). Hargreaves (2013) defined the biofloc as “a mixture of algae, bacteria, protozoans and other kinds of particulate organic matter such as feces and uneaten feed in addition to some of zooplankton and nematodes, formed together to be an
MAMDOH T. JAMAL,
MOHAMMED BROOM,
BANDAR A. AL-MUR,
MAMDOUH AL HARBI,
MOHAMMED GHANDOURAH,
AHMED AL OTAIBI,
MD FAZLUL HAQUE
Polish Journal of Microbiology, Volume 69 , ISSUE 4, 401–409
Article | 09-August-2018
Marcin Mateusz Kołakowski
Architecture, Civil Engineering, Environment, Volume 9 , ISSUE 1, 21–34
Article | 02-April-2020
with IPv4 in technology, which is bound to lead to the confusion of network architecture and operation. Therefore, IPv6 special network architecture has to be rebuilt to replace IPv4 network architecture (involving almost all the network software and hardware of infrastructure), which constitutes a “subversion” of the Internet based on IPv4 in fact.
After more than ten years of transitional practice, the United States has found that the cost of rebuilding IPv6 network is too large, there are too
Chengjin Mou,
Xiaohui Guo
International Journal of Advanced Network, Monitoring and Controls, Volume 5 , ISSUE 1, 61–65
Article | 19-April-2021
classification result is used to get the image segmentation and other results.
III.
EVALUATION OF VARIOUS SEGMENTATION ALGORITHMS
With the continuous development of technology, point cloud segmentation technology is no longer restricted to a single one or two. The data model can be segmented by different methods. But compared with several different segmentation methods, there are still different application scenarios, different segmentation methods also have their own advantages and disadvantages.
a
Wang Xu,
Liu Baolong
International Journal of Advanced Network, Monitoring and Controls, Volume 6 , ISSUE 1, 35–40
Article | 30-November-2018
I.
INTRODUCTION
UAV is named quad-rotor aircraft or quad-rotor UAV [1], It is a four-propeller sky aircraft with cross-shaped propellers. The UAV can be used to take aerial photos or record video with an optical camera or miniature video recorder. UAV photography measurement system is established on the basis of unmanned aerial vehicle (UAV) mobile platform, it is a kind of advanced measurement technology to achieve high spatial resolution remote sensing image data, it is playing the very major
Yuri Shebzukhov,
Wang Yubian
International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 4, 1–6
Article | 01-December-2014
In recent years, due to the video surveillance applications more and more widely, people are not satisfied with the goal of monitoring, and the video monitoring technology of intelligent video moving object detection and tracking technology has received extensive attention. The research work in this paper is in the field, the moving target detection spatiotemporal correlation and difference contour tracking algorithm based on a fixed background. The algorithm in the background under the
Pan Feng,
Wang Xiaojun,
Wang Weihong
International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 4, 1516–1534
Article | 01-March-2012
air quality monitoring system based on the technology of wireless sensor networks (WSNs). It also integrates with the global system for mobile communications (GSM). The system consists of sensor nodes, a gateway, and a control center managed by the LabVIEW program through which sensing data can be stored in a database. This system is deployed to the main roads in the Taipei city to monitor the carbon monoxide (CO) concentration caused by vehicle emissions. The experimental results show that
Jen-Hao Liu,
Yu-Fan Chen,
Tzu-Shiang Lin,
Chia-Pang Chen,
Po-Tang Chen,
Tzai-Hung Wen,
Chih-Hong Sun,
Jehn-Yih Juang,
Joe-Air Jiang
International Journal on Smart Sensing and Intelligent Systems, Volume 5 , ISSUE 1, 191–214
Article | 12-April-2018
As everyone knows, the time of virtual reality has come, how to control and correct use of VR has become a significant topic. "In the era of virtual reality better human-computer interaction", "virtual reality interactive context and traditional context where is the difference in space", "touch interactive virtual reality experience what? Through the man-machine interface design, the use of virtual 3D animation technology, implementation of new methods and new ways of
Zhou Xiaocheng
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 3, 103–108
Article | 16-December-2013
Linear Quadratic Regulator (LQR) is widely used in many practical engineering fields due to good stability margin and strong robustness. But there is little literature reports the technology that has been used to control the flying wing unmanned aerial vehicles (UAV). In this paper, aiming at the longitudinal static and dynamic characteristics of the flying wing UAV, LQR technology will be introduced to the flying wing UAV flight control. The longitudinal stability augmentation control law and
Yibo Li,
Chao Chen,
Wei Chen
International Journal on Smart Sensing and Intelligent Systems, Volume 6 , ISSUE 5, 2155–2181
Research Article | 01-June-2017
This paper discusses implementing a Location-Aware Library RFID service employing Radio Frequency Identification as a communication technology. Automating a library system with passive RFID tag infrastructure is proven to be feasible, and can be achieved with even distribution of RFID Antennas, well designed RFID network, an appropriate middleware, and a library application with an accurate error function that minimizes the error in the detected location to an acceptable distance, for instance
Ali Alwadi,
Jeff Kilby,
Amjad Gawanmeh
International Journal on Smart Sensing and Intelligent Systems, Volume 10 , ISSUE 2, 425–450
Article | 07-May-2018
With the development of computer technology, especially the emergence of high resolution image sensor, aerial photogrammetry has played an important role in geological survey. Traditional aerial measurements are carried out by manned large aircraft, with a large volume of measured information and a wide range of shots. This method is suitable for large area operation, which is high and expensive for hardware site. UAV air measurement systems are usually used for small area measurements. The UAV
Ding Li,
Chong Jiao
International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 2, 99–103
Article | 03-November-2020
With the intent to increase laboratory efficiency and according to the Clinical Laboratory Improvement Act of 1988 (CLIA ’88), a parallel testing program comparing traditional tube technology with the gel system technology was undertaken. Test tube indirect antiglobulin tests were performed using polyethylene glycol (PEG) as the antibody enhancement medium. Gel (GEL) column technology used the ID-Micro Typing System™, using predispensed anti-IgG and lowionic-strength saline for
Diane A. Derr,
Stacy J. Dickerson,
E.Ann Steiner
Immunohematology, Volume 14 , ISSUE 2, 72–74
Article | 08-April-2018
-specific functions with function block.IEC 61804 defines the function block for process control.In this paper, we discuss how a consistent function block capability may be provided for all fieldbus technology utilized in a control system. Examples will be given of how this standard has been applied in modern control systems to give a consistent interface to Foundation Fieldbus and PROFIBUS. Some detail will be presented on the standard means that is defined for manufacturers to describe function block
Zhuang Xia
International Journal of Advanced Network, Monitoring and Controls, Volume 1 , ISSUE 2, 112–117
Article | 07-May-2018
learning goals phenomenon. To this end, in order to solve this problem, we use the basis of ILTMK theory and distributed interactive technology to introduce the active learning factors and propose a dynamic autonomous knowledge learning model and build its model’s simulation running environment and related mechanism. Through simulation experiment, we can verify the effectiveness of the autonomous learning methods.
Yanfang Fu,
Xing Li,
Xueyao Feng,
Jing Ma
International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 2, 33–39
Article | 07-May-2018
With the maturity of UAV technology, especially the cost of the four rotor unmanned aerial vehicle is decreasing, the unmanned aerial vehicle (UAV) will be a trend in the future. At the same time, because ZigBee has the characteristics of low cost, low speed and short transmission distance, we use ZigBee to achieve the transmission of image files between UAV and ground receiving system computers. This paper introduces the system design and software program module hardware node design, the first
Fan Yijun,
Lai Yufeng
International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 2, 75–79
Case report | 01-December-2019
, D+ blood type showing strong reactivity with all cells tested in the forward and reverse ABO, in the D testing as well as in a three-cell antibody screen. The initial assumption was that the plasma contained a cold autoantibody. Subsequent testing, including the use of gel column technology, ficin-treated cells, and antisera for phenotyping, showed the apparent cold autoantibody to be a red herring. Additional tube testing at immediate spin, 37°C, and indirect antiglobulin test (IAT
Paula M.S. Wennersten,
Laurie J. Sutor
Immunohematology, Volume 30 , ISSUE 3, 117–120
Article | 28-April-2020
of IgM monoclonal anti-D blended with monoclonal IgG anti-D, one IgM monoclonal anti-D blended with polyclonal IgG anti-D, and two reagents formulated with human anti-D in a high-protein diluent. One antiD formulated for use by gel column technology was also tested. Direct agglutination tests by tube or gel were strongly positive (scores 9–12), with partial D RBCs of types DII, DIIIa, DIIIb, and DIVa. No reagent anti-D caused direct agglutination of DVI type 1, DVI type 2, or DFR phenotype
W. John Judd,
Marilyn Moulds,
Gloria Schlanser
Immunohematology, Volume 21 , ISSUE 4, 146–148
Article | 06-December-2020
The BioVue™ column agglutination technology (CAT) was evaluated simultaneously with standard tube test (STT) methodology for use in indirect antiglobulin testing (IAT) and direct antiglobulin testing (DAT). One thousand thirty-five blood specimens were used for the IAT comparison, and 44 blood specimens were used for the DAT comparison. Both polyspecific antiglobulin and anti-IgG antiglobulin reagents were used in the tube testing and the CAT testing. For IAT, sensitivity was 100 percent
Susan F. South
Immunohematology, Volume 9 , ISSUE 3, 78–80
Article | 30-November-2018
China is uppercase, not lowercase.
The patent for IPV9 includes three technologies: a new address coding design, a new addressing mechanism and a new address architecture design. These technologies constitute the core technology system at the bottom of the new generation IP network. The new network framework designed on this basis can form a network system that is connected and compatible with existing networks (Internet using IPv4 and IPv6 technologies).
IPV9 is not a simple upgrade of IPv4 and
Hui Wang,
Lingwen Liu,
Zhikai Yu,
Ming Li
International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 2, 40–47
original-paper | 18-February-2020
, which in turn provides nutrients to the resident bacteria (Spaink 2000).
This study aimed to provide a new understanding of the role of hydrogen in the plant-rhizobacterium interaction and gain a better understanding of metabolic processes underlying these relationships using S. meliloti 1021 as a model bacterium. To this end, we conducted transcriptome analysis of S. meliloti 1021 using RNA-sequencing (RNA-Seq) technology to identify differentially expressed genes in the presence and absence of
RUIRUI LIU,
LULU LI,
ZHIYING LI,
WEIWEI WANG
Polish Journal of Microbiology, Volume 69 , ISSUE 1, 39–48
research-article | 30-November-2017
1.
INTRODUCTION
The cantilever concreting technology was used first time in 1951 by U. Finsterwalder to construct the bridge over the Lahn Bulduinstein River. Hence most of bridges constructed with this technology have not exceeded half of the expected service life of 100 years. Until present times thousands of such bridges were made in the world. In Poland between 1963 and 1973 the cantilever method was used for the construction of three bridges (in two casess the prefabricated assembly was
Czeslaw MACHELSKI,
Bartosz PISAREK
Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 2, 65–72
research-article | 07-January-2020
WWTP mainstream has more effectiveness removal of nitrogen loads in the influent. Deammonification in sidestream is implemented in full-scale since 2002, when the first application started operation in the Netherlands. This technology is now considered as the most innovative technology for reject water treatment [12]. In the presented paper the operating problems in “Śródmieście” WWTP, resulting from ammonia nitrogen load are described.
Some efforts to find a proper, contemporary solution to this
Grażyna PĘCIAK-FORYŚ,
Krzysztof BARBUSIŃSKI,
Krzysztof FILIPEK
Architecture, Civil Engineering, Environment, Volume 12 , ISSUE 4, 115–123
Article | 09-April-2018
In order to realize remote automatic measurement and control of all petroleum well fuel pumps which are located in different regions of the crude oil production enterprises, this paper discusses and designs a petroleum well fuel pump measurement & control system based on internet of things technology. The measurement & control system uses a three-tier (perception layer, network layer and application control layer) form of the IOT (Internet of Things) structure, and then the function and
Shengquan Yang,
Ceng Gong
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 4, 127–132
Article | 05-September-2020
The paper presents the results of an experiment devoted to studying attention distribution and switching using eye-tracking technology. The experiment was conducted in two stages. At the first stage (year 2016), 48 students majoring in air traffic control were examined. At the second stage (year 2017), 43 students studying to become civil aviation pilots were involved. Correlation analysis methods and Pearson’s chi-squared test were used.
Olga ARINICHEVA,
Natalia LEBEDEVA,
Aleksei MALISHEVSKII
Transport Problems, Volume 15 , ISSUE 3, 167–179
Article | 04-March-2018
The interaction of the two kind activities of the Faculty of Transport of the Silesian University of Technology, namely the international conference and scientific journal, which have the same name "Transport Problems", is considered. It is proved that such interaction is very useful for transport scientists of different countries and serves a platform for information exchange and discussion of the most pressing problems of the transport industry. Changes that have occurred in this
Aleksander SŁADKOWSKI
Transport Problems, Volume 12 , ISSUE SE, 5–10
research-article | 02-July-2020
Introduction
Advancements in health monitoring have allowed for the development of external wearable systems, capable of unobtrusively capturing behavioral and physiological data in real-time. These systems, referred to as ‘wearable technology’ (WT) are devices worn externally, with built-in electronic functions utilized during the course of activity. Common WTs include fitness and activity trackers, smartwatches, and smart glasses, which measure a range of physiological and behavioral
Melissa H. Black,
Benjamin Milbourn,
Nigel T. M. Chen,
Sarah McGarry,
Fatema Wali,
Armilda S. V. Ho,
Mika Lee,
Sven Bölte,
Torbjorn Falkmer,
Sonya Girdler
Scandinavian Journal of Child and Adolescent Psychiatry and Psychology, Volume 8 , 48–69
Research Article | 13-December-2017
Existing researches on location tracking focus either entirely on indoor or entirely on outdoor by using different devices and techniques. Several solutions have been proposed to adopt a single location sensing technology that fits in both situations. This paper aims to track a user position in both indoor and outdoor environments by using a single wireless device with minimal tracking error. RSSI (Received Signal Strength Indication) technique together with enhancement algorithms is proposed
Erin-Ee-Lin Lau,
Boon-Giin Lee,
Seung-Chul Lee,
Wan-Young Chung
International Journal on Smart Sensing and Intelligent Systems, Volume 1 , ISSUE 2, 534–548
Article | 25-March-2018
with the main urban routes, in light of the principle of one change in the direction. There have also been determined the values of time expenditure for travel for the options of random selection of the change point and the use of GPS information technology.
Pridon GOGIASHVILI,
Gocha LEKVEISHVILI,
David KBILASHVILI,
Jumber CHOGOVADZE,
Vazha DOGRASHVILI
Transport Problems, Volume 13 , ISSUE 1, 159–167
Article | 18-March-2018
This article concerns the issue of reduction of CO2 emission in hybrid vehicles. External lighting through LED technology was applied to show additional CO2 savings in these vehicles. The authors propose for hybrid vehicles of M1 category: conditions of testing external lights, research equipment with measuring system and measuring method in order to determine energy savings obtained by application of external LED light. It enables to calculate saving of CO2 emission and estimate potential
Zbigniew ŁUKASIK,
Jacek KOZYRA,
Aldona KUŚMIŃSKA-FIJAŁKOWSKA
Transport Problems, Volume 12 , ISSUE SE, 87–94
Research Article | 11-February-2019
Piotr OBRACAJ
Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 4, 55–66
Article | 30-November-2018
Hejing Wu
International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 3, 25–31
Article | 27-December-2020
Richard H. Walker
Immunohematology, Volume 5 , ISSUE 2, 31–39
research-article | 30-November-2017
1.
INTRODUCTION
For many years open-air drawing was included in the curriculum and complemented the educational process at the Faculty of Architecture in University of Technology in Gliwice. The curriculum incorporated indoor drawing and painting workshops as well as design classes that integrated fine arts with architecture. Design classes covered designs of stained-glass works, wall painting, sgraffito, mosaics and artistic metalwork. Moreover, graphical techniques and calligraphy classes
Joanna ZABAWA-KRZYPKOWSKA,
Kinga PALUS
Architecture, Civil Engineering, Environment, Volume 11 , ISSUE 2, 49–55
Book Review | 14-October-2020
S. Gerald Sandler
Immunohematology, Volume 19 , ISSUE 3, 93–93
Article | 19-April-2021
fact, it is an Internet technology that can convert the private address of the internal network into a public address [5]. It can not only share a public address, but also use the bandwidth provided by the local network service provider to access the Internet safely at high speed [6], hiding and protecting the computers inside the network.
As shown in Fig. 2, IP addresses assigned by ISP1 and ISP2 to router ports of user LAN in community are 200.10.45.253 and 200.33.67.253 respectively, and IP
Wang Jian,
Wang Yubian
International Journal of Advanced Network, Monitoring and Controls, Volume 6 , ISSUE 1, 28–34
Original Paper | 27-September-2017
Grzegorz Kłosowski,
Dawid Mikulski,
Aleksandra Rolbiecka,
Bogusław Czupryński
Polish Journal of Microbiology, Volume 66 , ISSUE 3, 327–334
Article | 30-November-2020
technology system on cell Phones today makes life easier for everyone in rural areas but our major challenge is when it comes to charging them in the villages we have little or no electrical power supply,” says one irritated rural customer. (Susan P. Wyche, 2007). Some people who are tired of searching for opportunities to charge their phones just lose interest completely and eventually they will find out their “SIM” cards are de-activated as well. This is one of the last conditions the telecom
C. A. Mgbachi
International Journal of Advanced Network, Monitoring and Controls, Volume 6 , ISSUE 1, 24–27
Article | 14-October-2020
that can obtain high reward values in the environment, and find the best strategy to solve the problem in such constant interaction. Based on this idea, this paper use reinforcement learning technology to simulate the human visual attention mechanism. The agent is taught to change the shape of the bounding box and focus only on a significant part of the image at a time, and then extract its features through the convolutional neural network. Finally, the object of image positioning and
Wei Zhang,
Hongge Yao,
Yuxing Tan
International Journal of Advanced Network, Monitoring and Controls, Volume 5 , ISSUE 3, 65–72
Research Article | 13-December-2017
Goutam Chattopadhyay
International Journal on Smart Sensing and Intelligent Systems, Volume 1 , ISSUE 1, 1–20
Article | 01-December-2016
Fang Yinglan,
Han Bing,
Zhang Yongmei,
Tian Lin
International Journal on Smart Sensing and Intelligent Systems, Volume 9 , ISSUE 4, 2167–2185
Article | 02-April-2020
I.
INTRODUCTION
Routers work in the network layer of the OSI seven-layer protocol. Their main function is to connect the network with the network and forward packets between the networks. Routers have become the most important network equipment, so the research on the new generation of routers will become the core technology of the next generation of Internet research. Due to the IPv4, IPv6 protocols that used in the Internet, the new requirements for trusted Cyber Security connections are not
Jianping Xie,
Xianghao Nan,
Zoraghchin AliAb
International Journal of Advanced Network, Monitoring and Controls, Volume 5 , ISSUE 1, 9–14
Article | 10-April-2018
Yanhong Sun,
Mei Tian
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 4, 142–146
Article | 30-November-2018
I.
INTRODUCTION
With the development of radio frequency technology, product-related information can be quickly obtained by the readers if RF tags are assigned to each product. Recently, people have began to adopt IPV6 and even IPV9 protocol formats for RF tag coding since IPV4 address space has been used up. If the server storing product-related information is stored in an IPV4 or IPV6 network, how to query RF information across the network should be solved. This paper mainly studies the RF
Li Guiping,
Xue Lei
International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 4, 74–79
Research paper | 27-December-2017
Nicola Ivan Giannoccaro,
Luigi Spedicato,
Aimè Lay-Ekuakille
International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 2, 674–700
Article | 14-October-2020
Bill A. Martinez,
Liz A. Crews,
Arlene M. Dowd,
Melissa McMahan
Immunohematology, Volume 19 , ISSUE 1, 7–9
Research Article | 01-September-2017
A new way of data transmission between two vehicles using light fidelity technology is proposed in this paper. A best way of avoiding accidents can be achieved by the communication between the vehicles. This system can be simplified by using LED bulbs for data transmission. The previously used data transmission technology can be overcome by the newly proposed LIFI technology. The major objective of this system is to achieve reliable communication between the vehicle using a transmitter and a
Lokesh S,
Priya N,
Divyakanni K,
Karthika S
International Journal on Smart Sensing and Intelligent Systems, Volume 10 , ISSUE 5, 212–224
Research paper | 13-December-2017
Andreas Loizos,
Christina Plati
International Journal on Smart Sensing and Intelligent Systems, Volume 1 , ISSUE 2, 370–387
Research Article | 15-February-2020
Estefanía Núñez Carmona,
Veronica Sberveglieri,
Andrea Ponzoni,
Dario Zappa,
Andrea Pulvirenti
International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 5, 1–4
Letter to Editor | 18-October-2020
Stephen Apfalroth
Immunohematology, Volume 16 , ISSUE 4, 161–161
research-article | 31-August-2021
measurement.
Probe measurement is to collect the network traffic passing through the node through the probe, analyze and extract the service characteristics to obtain the performance data. Probe measurement mainly finds and observes the behavior of the network at a special node.
C.
Agent Measurement
Agent monitoring mode is a network quality monitoring method that uses agent technology to access target sites through agents. The agent mode solves the problem of how to monitor when there is no connection
Jian Wang,
Zhongsheng Wang
International Journal of Advanced Network, Monitoring and Controls, Volume 6 , ISSUE 3, 36–41
Article | 24-April-2018
Energy is the main resource for our country to survive. However, in recent years, the excessive consumption of energy has made the environment worse and worse, and made the development of our country restricted. Technology of circulating fluid-bed boiler is the main way of general clean coal at present, and is a hot topic for each country in the world. However, the experimental process of the technology often spend a great cost, therefore is not suitable in practice. So simulation technology of
Yingtao Hou,
Xiuhua Jiang
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 4, 202–206
Article | 01-March-2016
Jialiang LIU,
Wenrui Ding,
Hongguang Li
International Journal on Smart Sensing and Intelligent Systems, Volume 9 , ISSUE 1, 169–190