Research Article | 01-September-2017
A tree topology is used to construct to construct a Zigbee networks practices by wireless sensor network for data delivery applications. There are 3 types of nodes in zigbee networks; coordinator, router and mobile end devices. Coordinator performs the initialization and maintenance functions in the network. A router is responsible for routing data between the coordinator and mobile end device. In-order to avoid the delivery failures occurs due to node movements and network topology changes
R. Elankavi,
R. Kalaiprasath,
R. Udayakumar
International Journal on Smart Sensing and Intelligent Systems, Volume 10 , ISSUE 5, 174–185
Article | 01-December-2014
We designed a fuzzy controller for ZigBee equipment’s transmission power adaptive adjustment. The controller is based on RSSI (Received Signal Strength Indicator). It can make a dynamic adjustment on the transmitted power according to the fuzzy control rules. The fuzzy control is suitable to solve the problem which is difficult to deal with in building system mathematical model. What’s more, the fuzzy control system has perfect performance in response speed and antijamming capability. It’s
Zhonghu Yuan,
Wenwu Hua,
Xiaowei Han
International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 4, 1736–1752
Research Article | 13-December-2017
required in many applications in the wireless sensor networks, our study focuses on the ZigBee network which is a new industrial standard for sensor networks. Some previous related papers improved the broadcast reliability by introducing redundant transmission and increasing coverage ratio of every receiver node, but there still exists probability of packet loss and extra communication cost due to redundant broadcast. This paper proposes an efficient acknowledgement-based approach for reliable data
Tien-Wen Sung,
Ting-Ting Wu,
Chu-Sing Yang,
Yueh-Min Huang
International Journal on Smart Sensing and Intelligent Systems, Volume 3 , ISSUE 3, 504–520
Article | 01-September-2014
monitoring network used in a shape judgment system is introduced. In order to connect the server pc and the PLC (a controller of a shape judgment system), a ZigBee wireless module in conjunction with a transparent mode is used. Additionally, the interface of the above system is established with a Visual Basic 6.0. One of the advantages in using a wireless network to connect with a server pc and a shape judgment system is that the server pc is movable. Moreover, the remote monitoring function at the
Ho-Chih Cheng,
Min-Chie Chiu
International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 3, 1378–1400
Research Article | 12-December-2017
Location awareness is important in health care. One way of generating this is a low-frequency radio frequency identification (RFID) location system that has been developed. The system tracks RFID tags with a quad antenna matrix that is placed under the floor surface. The tag can be also used to receive alarms and send acknowledgements via a ZigBee network. This article discusses the requirements of this kind of a tag, its structure, and its location accuracy. The demonstrated RFID system can
A. Ropponen,
M. Linnavuo,
R. Sepponen
International Journal on Smart Sensing and Intelligent Systems, Volume 4 , ISSUE 1, 75–93
Article | 03-November-2017
fuzzy controller for air-condition with Zigbee sensors is used to provide the comfort and energy-saving benefit. Although traditional control system (shorten as TCS) and the proposed fuzzy control system (named as FCS) have a common goal of temperature control, they differ from each other in temperature switch decision made during the each ambient temperature phases. Under the operating policy to limit the air-condition power on/off power frequency, the simulation result present the FCS energy
Tzu-Ming Wang,
I-Ju Liao,
Jen-Chi Liao,
Tain-Wen Suen,
Wei-Tsong Lee
International Journal on Smart Sensing and Intelligent Systems, Volume 2 , ISSUE 4, 636–652
Article | 01-September-2014
The intelligent home system finished the wireless or remote control for all the indoor electric devices through the intelligent terminals. The description about the integrated network architecture and the interconnecting mechanisms for the reliable measurement of parameters by smart sensors and transmission of data via internet is being presented. The wireless communication technology includes the WiFi, Zigbee and mobile communications. The system presented the design of the hardware part and
Xin Zhenghua,
Chen Guolong,
Hong Li,
Qixiang Song,
Chen Lei,
Shi Yaqi,
Wu Gang
International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 3, 1095–1113
Research Article | 01-March-2017
8.25%, and 1.86, respectively. The results show that the bicycle torque can be measured accurately and transmitted using ZigBee wireless protocol.
Sadik Kamel Gharghan,
Rosdiadee Nordin,
Mahamod Ismail
International Journal on Smart Sensing and Intelligent Systems, Volume 10 , ISSUE 1, 124–145
Article | 07-May-2018
With the maturity of UAV technology, especially the cost of the four rotor unmanned aerial vehicle is decreasing, the unmanned aerial vehicle (UAV) will be a trend in the future. At the same time, because ZigBee has the characteristics of low cost, low speed and short transmission distance, we use ZigBee to achieve the transmission of image files between UAV and ground receiving system computers. This paper introduces the system design and software program module hardware node design, the first
Fan Yijun,
Lai Yufeng
International Journal of Advanced Network, Monitoring and Controls, Volume 3 , ISSUE 2, 75–79
Article | 03-November-2017
In this paper, we propose the portable automatic conjecturing and announcing system for real-time accident detection. There are six sensors with 3-axis accelerometers and the ZigBee transmission standard mounted on the patients' specific region. After being transmitted to the mobile device through the ZigBee devices, the data are analyzed immediately. When the accident occurs, the mobile device could get the user's location with Assisted Global Positioning System (AGPS) and transmit the
Chin Feng Lai,
Chen Ying Liu,
Sung-Yen Chang,
Yueh Min Huang
International Journal on Smart Sensing and Intelligent Systems, Volume 2 , ISSUE 2, 329–344
Article | 24-April-2018
architecture of the system, and discusses the key technologies: ZigBee networking, MQTT protocol, Node.js, and mobile client technology. This paper proposed an effectively way of urban parking problem.
Zhongsheng Wang,
Zhichao Lian,
Kang Han
International Journal of Advanced Network, Monitoring and Controls, Volume 2 , ISSUE 4, 36–41
Article | 30-November-2018
technology, Wi-Fi technology, GPRS, ZigBee and so on. Because of the low power consumption of ZigBee network and autonomous network, this paper chooses ZigBee network.
In order to achieve low power consumption, this paper considers two aspects, one is sensor power consumption, the other is processor power consumption. There are two sensors, spring switch and acceleration sensor. If there is no vehicle passing, the system will sleep deeply to save power. When there is a vehicle passing, the spring switch
Guoshao Chen,
Fei Xu
International Journal of Advanced Network, Monitoring and Controls, Volume 4 , ISSUE 3, 65–72
Research Article | 15-February-2020
Traditional heavyweight routing algorithms are not suitable for resource constrained IEEE 802.15.4 [15] complaint devices. Although, ZigBee [21] provided an addressing scheme and a table-free Tree routing algorithm for such devices, it has several limitations [6, 7, 8, 9]. In this paper, we have proposed a flexible, variable-length addressing scheme together with a new lightweight, table-free routing algorithm. The addressing scheme leverages the properties of prefix code and allows devices to
Uttam Kumar Roy
International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 5, 1–6
Research paper | 01-September-2011
the wireless communication is realized through a MRF24J40MA Zigbee module. The results obtained prove that the sensor node possess good features such as, low cost, simple to use, minimal power consumption, long network range and compatibility with analog/digital sensors. The simple construction procedures create the possibility of implementing such customizable sensor node for the different environmental monitoring applications.
S. Edward Jero,
A. Balaji Ganesh,
T.K. Radhakrishnan
International Journal on Smart Sensing and Intelligent Systems, Volume 4 , ISSUE 3, 482–495
Research Article | 01-September-2017
This paper proposes a novel environmental monitoring mechanism to integrate recentlyestablished development of an Unmanned Aerial System (UAS) with WSNs for remote monitoring. The high mobility of UASs can solve the limitations associated with using WSNs in hazardous areas. In this paper, the WSN node, the Wireless Environmental Monitoring Station (WEMS), is based on ZigBee protocol for long-duration monitoring. Furthermore, to ensure the integrity of collected environmental data, an algorithm
Ching-Ju Chen,
Jou-An Chen,
Yueh-Min Huang
International Journal on Smart Sensing and Intelligent Systems, Volume 10 , ISSUE 3, 696–717
Research Article | 01-September-2017
popular. We come across many types of carts used for shopping in malls and shopping center. The major purpose of this effort is reducing delays in foremost supermarkets or shopping center via income of an electronic smart cart method which will introduce an cognitive approach to billing system during RFID technology. Zigbee is base scheduled an IEEE 802.15 ordinary. Zigbee devices a group of pass on data more than longer space by transient data through transitional devices to make more distances ones
S. Mekala,
M. Thanagaraj,
M. Chandranath,
K.K.Vasanta Kumaran
International Journal on Smart Sensing and Intelligent Systems, Volume 10 , ISSUE 5, 414–425
Article | 01-December-2014
We are pursuing our research on ZigBee based WSNs for more than 8 years; a lot of realization stories are conveyed in literature on the development of wireless measurement of sensors data using ZigBee (XBee RF module). Many projects are fruitfully completed for applications such as smart home for elder care, environmental monitoring, big building monitoring and so on. Still a lot of design issues are there while the systems are designed using ZigBees. In this research paper the working
H. Ghayvat,
A. Nag,
N. K. Suryadevara,
S.C. Mukhopadhyay,
X. Gui,
J. Liu
International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 4, 1997–2013
Research Article | 01-December-2017
the type of application and Quality of Service (QoS) parameters. The technologies like Zigbee, WiFi, and Bluetooth operating in 2.4GHz are mostly considered for deploying the WSN. Because of coexistence environment, the performance of Zigbee gets affected in terms of channel switching and causes the significant amount of delay. Also, the data transmission should be performed without any collision. In this paper, initially, the pseudorandom – based interference evading scheme is introduced for
Vikram K,
Sarat Kumar Sahoo
International Journal on Smart Sensing and Intelligent Systems, Volume 10 , ISSUE 4, 879–902
Research Article | 20-February-2013
is designed using modularization way, and this kind of wireless sensor loaded with ZigBee/IEEE 802.15.4 MAC protocol stack can self-organize wireless sensor network, measure the angle value and send the data to the coordinator. Then the deflection curve is displayed on PC. Finally, deflection measurement experiments are conducted on a bridge model and Beida Bridge. The experimental results show that, the presented deflection measurement method is feasible, practical and reliable; the wireless
Yan Yu,
Hang Liu,
Dongsheng Li,
Xingquan Mao,
Jinping Ou
International Journal on Smart Sensing and Intelligent Systems, Volume 6 , ISSUE 1, 38–57
Article | 30-November-2019
laboratory security system design, and proposes a set Networked laboratory security system. The system uses sensor design nodes to form a ZigBee wireless sensor network to realize the collection of environmental information in the laboratory, thereby automatically monitoring the occurrence of some security risks.
II.
IOT TECHNOLOGY
Internet of Things (abbreviation: IoT) originated in the media field and is the third revolution of the information technology industry[1]. The Internet of Things refers to
Ding Li,
Shi Xuerong,
Zhang Dujuan,
Su Yulei
International Journal of Advanced Network, Monitoring and Controls, Volume 5 , ISSUE 2, 39–46
Research Article | 01-September-2017
Wireless Sensor Network (WSN) consists of three main components: nodes, gateways, and software. The spatially distributed measurement nodes interface with sensors to monitor assets or their environment. In a WSN network the devices are connected to WSN nodes wherein the entire nodes uses Zigbee network to transfer the status of connected applications to a controller which controls the whole applications but the main drawback of Wireless sensor networks is its high interference, low coverage
M.Anto Bennet,
B Thamilvalluvan,
C.A. Hema Priya,
B. Bhavani,
M. Shalini
International Journal on Smart Sensing and Intelligent Systems, Volume 10 , ISSUE 5, 69–86
Article | 23-December-2013
Hou Honglun,
Huo Meimei,
Wu Minghui
International Journal on Smart Sensing and Intelligent Systems, Volume 6 , ISSUE 5, 2200–2216
Research Article | 15-February-2020
A Gaddam,
M Al-Hrooby,
W F Esmael
International Journal on Smart Sensing and Intelligent Systems, Volume 7 , ISSUE 5, 1–6